Pre-owned APSX NANO 2022 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Maryland. This APSX CNC Lathe is available for a limited time. Get a quo...Read More
Seller Needs:
Payment:
Specs:
Bar Capacity: 0.75"
Z Axis Travel: 17"
Machine base footprint: 31" (D) by 14" (W)
Required space: 40” (D) by 22” (W)
Approximate weight: 150 lbs
Power: 120V standard wall outlet with proper grounding
Lighting: Low energy Blue LED in the machining area for visibility
USB memory stick is used for loading g-code files on the control panel
Adjustable mist (coolant) on the point of machining
Hard anodized casting tool plate aluminum construction
Polycarbonate safety shield
Sliding cover to access to barstock area
PC, keyboard, and pendant are included
APSX CNC software is installed (easy to read user interface)
Materials available are aluminum, brass, bronze, delrin (acetal), peek, stainless steel, titanium and more.
Standard bar diameter is 0.50 inches and 1/2 inches guidebushing is included with the machine
Max bar diameter is 0.75 inches (0.75", 0.625", 0.375" and 0.25" guide bushings and couplings are sold separately)
Precision ground bar diameter tolerance -0.0005"-0" preferred.
Straightness Tolerance 0.01" per ft. suggested
Max bar length to install: 20” (Machinable length: 17”)
Spindle and Motors
Main servo motor (Teknic) spindle RPM is 1800 and power is 300W - 0.43 degrees resolution and 0.03 degrees repeatability. Guide bushing runout accuracy .0003" or less.
2000 - 10000 RPM Pressured Air-Chilled 500W Live Tool Spindles (2) with ER11 collets (1/4" and 1/8" 2 flute end mills) - 80PSI shop air with 0.25" female coupler required
Three NEMA23 stepper motors with a rapid speed of 90 IPM on X, Y and Z axes
Stepper repeat accuracy at no load (+/- 0.0002") and achievable machining accuracy less than 0.0005"
Tools
Number of external (OD) tool slots: 6 (12mm X 12mm profile)
Number of internal ID tool slots: 5 (ID tool holders are 16mm diameter)
The distance from the ID tool rack to guide bushing plate is 4.5 inches
APSX CNC Software
Dimensions: 40" x 22" x "
Weight: 150 LBS
Z Axis Travel: 17"
Machine base footprint: 31" (D) by 14" (W)
Required space: 40” (D) by 22” (W)
Approximate weight: 150 lbs
Power: 120V standard wall outlet with proper grounding
Lighting: Low energy Blue LED in the machining area for visibility
USB memory stick is used for loading g-code files on the control panel
Adjustable mist (coolant) on the point of machining
Hard anodized casting tool plate aluminum construction
Polycarbonate safety shield
Sliding cover to access to barstock area
PC, keyboard, and pendant are included
APSX CNC software is installed (easy to read user interface)
Materials available are aluminum, brass, bronze, delrin (acetal), peek, stainless steel, titanium and more.
Standard bar diameter is 0.50 inches and 1/2 inches guidebushing is included with the machine
Max bar diameter is 0.75 inches (0.75", 0.625", 0.375" and 0.25" guide bushings and couplings are sold separately)
Precision ground bar diameter tolerance -0.0005"-0" preferred.
Straightness Tolerance 0.01" per ft. suggested
Max bar length to install: 20” (Machinable length: 17”)
Spindle and Motors
Main servo motor (Teknic) spindle RPM is 1800 and power is 300W - 0.43 degrees resolution and 0.03 degrees repeatability. Guide bushing runout accuracy .0003" or less.
2000 - 10000 RPM Pressured Air-Chilled 500W Live Tool Spindles (2) with ER11 collets (1/4" and 1/8" 2 flute end mills) - 80PSI shop air with 0.25" female coupler required
Three NEMA23 stepper motors with a rapid speed of 90 IPM on X, Y and Z axes
Stepper repeat accuracy at no load (+/- 0.0002") and achievable machining accuracy less than 0.0005"
Tools
Number of external (OD) tool slots: 6 (12mm X 12mm profile)
Number of internal ID tool slots: 5 (ID tool holders are 16mm diameter)
The distance from the ID tool rack to guide bushing plate is 4.5 inches
APSX CNC Software
Dimensions: 40" x 22" x "
Weight: 150 LBS
Seller:
JohnF548
Location:
MD