Used AWEA BM850 Vertical Machining Center
Pre-owned AWEA BM850 2006 Vertical Machining Center for only $14,500 $7,500. This Vertical Machining Center has average cutting time and is equipped with a Fanuc 0i-MD control. This CNC Machine is currently located in FL. This AWEA Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this BM850 before it's gone.
Specifications:
X Axis Travel: 33.46"
Y Axis Travel: 24.94"
Z Axis Travel: 24.94"
Rapid Rate X Axis: 943 IPM
Rapid Rate Y Axis: 943 IPM
Rapid Rate Z Axis: 943 IPM
Table Size: 41.3" x 23.6"
Max Table Load: 1,870 LBS
Spindle Motor: 20 HP
Spindle Speed: 6,000 RPM
Spindle Taper: BT40
Tool Changer: 24 ATC
# Speed Ranges: 2
Spindle Nose To Table (Max): 28.54"
Spindle Nose To Table (Min): 4.92"
Spindle Center To Column: 26.77"
Tool Change Time C-to-C (sec): 7.00 sec tool-to-tool
Max. Tool Length (in.): 11.800
Max. Tool Diameter (in.): 7.870 (with empty adjacent pockets)
Max. Tool Weight: 33.00
Dimensions: 102" x 109" x 107"
Weight: 14,300 LBS
Y Axis Travel: 24.94"
Z Axis Travel: 24.94"
Rapid Rate X Axis: 943 IPM
Rapid Rate Y Axis: 943 IPM
Rapid Rate Z Axis: 943 IPM
Table Size: 41.3" x 23.6"
Max Table Load: 1,870 LBS
Spindle Motor: 20 HP
Spindle Speed: 6,000 RPM
Spindle Taper: BT40
Tool Changer: 24 ATC
# Speed Ranges: 2
Spindle Nose To Table (Max): 28.54"
Spindle Nose To Table (Min): 4.92"
Spindle Center To Column: 26.77"
Tool Change Time C-to-C (sec): 7.00 sec tool-to-tool
Max. Tool Length (in.): 11.800
Max. Tool Diameter (in.): 7.870 (with empty adjacent pockets)
Max. Tool Weight: 33.00
Dimensions: 102" x 109" x 107"
Weight: 14,300 LBS
Equipped With:
Fanuc 0i-MD
Chip Conveyor
Chip Conveyor
Owner:
Robert (Machine Shop in USA)
