Used BLANCHARD 11AED 20 Grinding

Pre-owned BLANCHARD 11AED 20 1980 Grinding. This Grinding has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Missouri. This BLANCHARD Grinding is available for a limited time.Get a quote today on this 11AED 20 before it's gone.

Chuck Size: 20"
Chuck Dia.: 20"
Spindle (Horz/Vert): Vert
Power: 15 hp
Swing: 21"
Under Wheel: 12"
Grinding Wheel Width: 5"
Grinding Wheel Dia.: 11"
Concentric Pole Spacing: .5"
Swing Capacity Inside Waterguards: 21"
Grind to Center Diameter: 21"
Vertical Range Under New Wheel: 12"
Unbalanced Work Load on Chuck: 500 lbs
Chuck Rotation Speed: 75 RPM
Grinding Wheel Size: 11" x 5" x 9"
Grinding Wheel Speed: at 60Hz: 1,200 RPM, at 50Hz: 1,500 RPM

Feed System
Rapid Traverse Rate: 20 IPM
Wheel Head Jog Rate: .100 IPM
Coarse Feed Rate: .001 to .100 IPM
Coarse Feed Mode: Continuous
Fine Feed Rate: .001 to .010 IPM
Fine Feed Mode: Continuous
Coarse to Fine Changeover Point: 0 to .009"
Sparkout Timer: .1 to 10 Minutes
Head Position Readout: 0.000 to 9.999"

Grinding Wheel Motor: 15 HP
Chuck Rotation Motor: 2 HP
Head Feed Motor: 5.8 lb-ft
Table Traverse Motor w/ Brake: .25 HP
Electric Power Requirement: 30 KVA
Standard Voltages: 3 PH/60 Hz: 230/460 Volt
3 PH/50 Hz: 220/380 Volt
Ed (Machine Shop in USA)