Seller Needs:
$30,975|
411
|
4
This 2017 DATRON M7-HP Vertical Machining Center showcases a blend of speed and precision. It offers a compact design yet delivers a high level of performance, thus, meeting the needs of various applications.
Options and upgr...Read More
Seller Needs:
Payment:
Specs:
X Axis Travel: 20.47"
Y Axis Travel: 25.59"
Z Axis Travel: 9.45"
Spindle Speed: 60,000 RPM
Spindle Taper: E25
Tool Changer: 11 ATC
Table Size: 18" x 12"
Description:
- Low height that increases the workspace of the machine - Double encapsulated spindle providing optimal protection against chips
- High clamping forces
- Suitable for all DATRON CNC milling machines with the appropriate holder in the
machine table (see technical data)
Technical data:
- Basic body length: 160 mm
- Total length: 200 mm
- Basic body height: 50 mm
- Clamping jaw width: 125 mm
- Clamping force (max.): 35 KN
- Table Grid: 100mm x 100mm *Info kommt von Sven - Weight: 6,4 kg
-Gantry Style Machining System with Fabricated steel bridge filled with polymer-concrete for vibration dampening and stability (8” gantry clearance)
- Solid granite table with 20" by 20" work envelope
- Precision fine pitch ballscrews for better than ±0.001" positional accuracy
- Digital servo drive system complete with ground ballscrews on each axis, two linear guide ways per axis, precision encoders on each drive motor with index pulse disc on each ballscrew and over-travel limit switches .
DATRON CNC v9 Control System
3D-CNC control software for DATRON CNC machine: Windows based control software allows user to operate the machine. Comes complete with conversational control,
CNC Hand-held control unit B6
Integrates primary machine function control into single hand -held unit
Integrated emergency stop
Programmable function keys
High frequency 0.6kwatt spindle with 6mm collet Spindle comes complete with Type 2 high frequency converter. Cooling unit is not required.
Microjet cooling system with 5L tank: Microjet high pressure mist system efficiently cools and lubricates the cutting tool . Microjet can dispense alcohol or oil.
Two Nozzle head for Microjet Adjustable nozzles with knucklestyle spray hoses.
Tool change unit with 15 tool capacity (M7 only): Pneumatic (covered) tool change magazine comes complete with tool length sensor.
DATRON CNC V9 Iso+ (Scope of Delivery: Protected Areas, Tool Monitoring ISO IN /OUT, Smoothing Function
DATRON CNC v9 EXPERT incl.ISO+
Software Upgrade from DATRON CNC v9 ISO+ to DATRON CNC v9 EXPERT incl. ISO+
Z-height surface sensing precision probe TP-R: The high precision probe uses Renishaw TP20 magnetic break-away head with replaceable ruby tips.
3D Software Extension for Z probe: Software option allows user to edge find for quick set-up and exporting of x,y data points.
VacuMate 12"x18": Regular hole pattern -
Busch Vacuum Pump
Y Axis Travel: 25.59"
Z Axis Travel: 9.45"
Spindle Speed: 60,000 RPM
Spindle Taper: E25
Tool Changer: 11 ATC
Table Size: 18" x 12"
Description:
- Low height that increases the workspace of the machine - Double encapsulated spindle providing optimal protection against chips
- High clamping forces
- Suitable for all DATRON CNC milling machines with the appropriate holder in the
machine table (see technical data)
Technical data:
- Basic body length: 160 mm
- Total length: 200 mm
- Basic body height: 50 mm
- Clamping jaw width: 125 mm
- Clamping force (max.): 35 KN
- Table Grid: 100mm x 100mm *Info kommt von Sven - Weight: 6,4 kg
-Gantry Style Machining System with Fabricated steel bridge filled with polymer-concrete for vibration dampening and stability (8” gantry clearance)
- Solid granite table with 20" by 20" work envelope
- Precision fine pitch ballscrews for better than ±0.001" positional accuracy
- Digital servo drive system complete with ground ballscrews on each axis, two linear guide ways per axis, precision encoders on each drive motor with index pulse disc on each ballscrew and over-travel limit switches .
DATRON CNC v9 Control System
3D-CNC control software for DATRON CNC machine: Windows based control software allows user to operate the machine. Comes complete with conversational control,
CNC Hand-held control unit B6
Integrates primary machine function control into single hand -held unit
Integrated emergency stop
Programmable function keys
High frequency 0.6kwatt spindle with 6mm collet Spindle comes complete with Type 2 high frequency converter. Cooling unit is not required.
Microjet cooling system with 5L tank: Microjet high pressure mist system efficiently cools and lubricates the cutting tool . Microjet can dispense alcohol or oil.
Two Nozzle head for Microjet Adjustable nozzles with knucklestyle spray hoses.
Tool change unit with 15 tool capacity (M7 only): Pneumatic (covered) tool change magazine comes complete with tool length sensor.
DATRON CNC V9 Iso+ (Scope of Delivery: Protected Areas, Tool Monitoring ISO IN /OUT, Smoothing Function
DATRON CNC v9 EXPERT incl.ISO+
Software Upgrade from DATRON CNC v9 ISO+ to DATRON CNC v9 EXPERT incl. ISO+
Z-height surface sensing precision probe TP-R: The high precision probe uses Renishaw TP20 magnetic break-away head with replaceable ruby tips.
3D Software Extension for Z probe: Software option allows user to edge find for quick set-up and exporting of x,y data points.
VacuMate 12"x18": Regular hole pattern -
Busch Vacuum Pump
Options:
Probe
Seller:
CharS150
Location:
USA
