Machine Overview
Pre-owned DMC DL6T 2015 CNC Lathe. <p>This 2015 DMC DL6T CNC Lathe is a small footprint turning center built for shops that need steady cuts and simple setup. The machine has under 1,000 hours, so the ways, spindle, and turret show light use. It runs on AC200/220V, 3 phase, with a 20 kVA load and a 55 amp draw.</p><p>The spindle holds a 6 inch chuck and is set up for short part work. The turret has tool blocks in place and is ready for quick setup changes. The control layout is clear and gives quick access to the main functions needed for day-to-day turning. Cuts inside the enclosure are clean, and the coolant system is in place and running.</p><p>The footprint stays small at about 80 inches long, 60 inches deep, and 65 inches high. Weight is about 2,700 kg, which helps the lathe sit steady without extra pads. The size also makes it easy to move into tight floor plans or small shop bays.</p>
Machine Comps
"This deal went awesome, I'm super impressed!"
"Very easy to deal with and professional. Made the selling process headache free with options based on my time frame."
"Michael helped me sell 3 Haas machines over the summer of 2016. CNC Machines was professional and effective at getting all of the machines sold."
"CNCMachines.com is a top notch company! Now that I know you can purchase a machine online with someone that can be trusted, I will go back to CNCMachines.com for future purchases."
