Pre-owned DMG MORI SEIKI MILLTAP 700 2013 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a Siemens control. This CNC Machine is currently located in USA. This DMG MORI SEIKI Vertical Machining Center is available for a limited time. Get a quote today on this MILLTAP 700 before it's gone.
Seller Needs:
Payment:
Specs:
Electrics: 230 Volt, 3 Phase, 60 Hz, 35 Amp
Main Motor: 14 KVA (20 HP)
Features and Specifications:
...Siemens CNC Control
...Table Size: 33.1" x 16.5"
...Table Load (approx.): 882 lbs. Max.
...Travels:
......X-Axis: 27.6?
......Y-Axis: 16.5?
......Z-Axis: 15?
...Spindle Speed: 24,000 RPM
...Spindle Taper: BT30
...ATC: 25 Slots
...Feeds:
......Rapid Traverse: 2,362 IPM
...4th-Axis Wired
...Chip Conveyor
......Mosnic RF2060RA2A
...Lubricant System
...Coolant Tank & Pump
...4th-Axis Trunnion (Quoted Separately)
......DDRT-200X
...Tooling
......(98) Toolholders
......Collets
Equipment Dimensions (approx.): 72" x 116” x 120” Tall
Equipment Weight (approx.): 7,500 lbs.
Functionality Notes and History:
There are two (2) sister machines for sale; they are the original owner. Both machines need to have at least one (1) of the axis scales replaced. Mori has quoted $2,500 for each scale + labor to install.
One (1) machine is wired for 4th-Axis and (1) is only 3-axis unit. Both machines require scale replacement on at least one axis. These machines also have one (1) extra spindle assembly that was ordered for replacement prior to diagnosing a problem with the drawbar. This assembly has maybe one month's service and is packed in a box as a spare part.
We are quoting the 4th-Axis trunnion separately from the units. Ninety-eight (98) toolholders are available for both machines, as shown in the pictures. The two machines have twelve (12) and thirteen (13) holders in the carousels, respectively; fifty-seven (57) holders are in the cart. An undetermined number of collets also come with the machines.
Main Motor: 14 KVA (20 HP)
Features and Specifications:
...Siemens CNC Control
...Table Size: 33.1" x 16.5"
...Table Load (approx.): 882 lbs. Max.
...Travels:
......X-Axis: 27.6?
......Y-Axis: 16.5?
......Z-Axis: 15?
...Spindle Speed: 24,000 RPM
...Spindle Taper: BT30
...ATC: 25 Slots
...Feeds:
......Rapid Traverse: 2,362 IPM
...4th-Axis Wired
...Chip Conveyor
......Mosnic RF2060RA2A
...Lubricant System
...Coolant Tank & Pump
...4th-Axis Trunnion (Quoted Separately)
......DDRT-200X
...Tooling
......(98) Toolholders
......Collets
Equipment Dimensions (approx.): 72" x 116” x 120” Tall
Equipment Weight (approx.): 7,500 lbs.
Functionality Notes and History:
There are two (2) sister machines for sale; they are the original owner. Both machines need to have at least one (1) of the axis scales replaced. Mori has quoted $2,500 for each scale + labor to install.
One (1) machine is wired for 4th-Axis and (1) is only 3-axis unit. Both machines require scale replacement on at least one axis. These machines also have one (1) extra spindle assembly that was ordered for replacement prior to diagnosing a problem with the drawbar. This assembly has maybe one month's service and is packed in a box as a spare part.
We are quoting the 4th-Axis trunnion separately from the units. Ninety-eight (98) toolholders are available for both machines, as shown in the pictures. The two machines have twelve (12) and thirteen (13) holders in the carousels, respectively; fifty-seven (57) holders are in the cart. An undetermined number of collets also come with the machines.
Options:
Siemens
Chip Conveyor
Wired for 4th Axis (Table quoted separate)
Chip Conveyor
Wired for 4th Axis (Table quoted separate)
Seller:
JerrS494
Location:
USA
Further Reading