DMG MORI SEIKI NTX2000SZ

DMG MORI SEIKI NTX2000SZ CNC Lathe

How do I sell my DMG MORI SEIKI? Click Here.

Pre-owned DMG MORI SEIKI NTX2000SZ 2014 CNC Lathe for only Call for price. This CNC Lathe has average cutting time and is equipped with a Fanuc 31iB5 CNC Control control. This CNC Machine is currently located in FL. This DMG MORI SEIKI CNC Lathe is the only one in stock and available for a limited time. Get a quote today on this NTX2000SZ before it's gone.

Used DMG MORI SEIKI NTX2000SZ CNC Lathe

Specifications:
Bar Capacity: 2.5"
Chuck Size: (2) 8"
Spindle Speed: (2) 5,000 RPM
Spindle Motor: 40 HP
X Axis Travel: 19.5"
Z Axis Travel: 61.4"
Rapid Rate Z Axis: 1,574 IPM
Rapid Rate X Axis: 1,181 IPM
Max Turning Dia: 24"
Max Turning Length: 60.6"
Max Swing: 25.9"

TRAVEL:
X-axis 19.5”
Y-axis +/-4.9”
Z-axis 61.4”
B-axis 120°
X2-axis 6.3”
Z2-axis 55.2”

SPINDLE #1:
Maximum spindle speed: 5000 RPM
Number of spindle speed ranges 1
Type of spindle nose: A2-6
Through-spindle hole diameter: 2.9”
Minimum spindle indexing increment 0.0001°
Spindle torque: (ft·lbf) 169.6/131.3/117.3

SPINDLE #2:
Maximum spindle speed 5000 RPM
Number of spindle speed ranges 1
Type of spindle nose A2-6
Through-spindle hole diameter 2.9”
Minimum spindle indexing increment 0.0001°
Spindle torque: (ft·lbf) 169.6/131.3/117.3

TOOLS:
Minimum B-axis indexing increment 0.0001°
Maximum tool spindle speed min-1 12,000 RPM
Taper hole of rotary tool spindle Capto
Tool storage capacity 76 ATC
Maximum tool diameter 2.7”
Maximum tool diameter 4.9”
Maximum tool length 11.8”
Maximum tool mass 17.6 lbs [22 lbs]
Tool changing time sec 1.25
Spindle torque ft·lbf 88.5/32.5

LOWER TURRET:
Number of tool stations 10
Turret Indexing time sec 0.19

MOTORS:
Spindle 1 drive motor 30/24.7 HP
Spindle 2 drive motor 30/24.7 HP
Tool spindle drive motor 24.7/15 HP

POWER SOURCES:
Electrical power supply kVA 79.9
Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 650 (171.6)
Dimensions: 160" x 104" x 117"
Weight: 34,900 LBS
Equipped With:
Fanuc 31iB5 CNC Control
Chip Conveyor
Chip Blaster
Sub Spindle
Hobbing
Bar Feed Interface

This deal went awesome, I'm super impressed!

End of Lease Manager

US Bank