Seller Needs:
$210,000|
9
|
0
Pre-owned DOOSAN NHM8000 2018 Horizontal Machining Center. This Horizontal Machining Center has average cutting time and is equipped with a FANUC control. This CNC Machine is currently located in USA. This DOOSAN Horizontal Machining Center is available for a limited time. Get a quote today on this NHM8000 before it's gone.
Seller Needs:
Payment:
Specs:
Table Size: 800mm x 800mm (31.5" x 31.5")
Max Table Load: Approx. 2,000kg
X/Y/Z Axis Travel: 1,400mm / 1,200mm / 1,350mm
B-Axis Rotation: Full 360° (1° increments )
Spindle Speed: 6,000 RPM
Spindle Power: A22/7000_35/22kW
Spindle Taper: BT50
Tool Magazine Capacity: 60 tools
Max Tool Weight: 30kg
Max Feed Rate (X/Y/Z Axis): 30 m/min
Rapid Traverse Speed: X/Y/Z 30 m/min
NC Controller: FANUC 31i -B
Machine Dimensions: Approx. 6,000mm x 5,000mm x 4,000mm (including installation space)
Machine Weight: Approx. 25,000kg
CHIP CONVEYOR_HINGED BELT REAR SIDE
THROUGH SPINDLE COOLANT 30 BAR
CHIP BUCKET
FLOOD COOLANT PUMP
SPINDLE AIR CURTAIN
COOLANT GUN
AUTO POWER OFF
Max Table Load: Approx. 2,000kg
X/Y/Z Axis Travel: 1,400mm / 1,200mm / 1,350mm
B-Axis Rotation: Full 360° (1° increments )
Spindle Speed: 6,000 RPM
Spindle Power: A22/7000_35/22kW
Spindle Taper: BT50
Tool Magazine Capacity: 60 tools
Max Tool Weight: 30kg
Max Feed Rate (X/Y/Z Axis): 30 m/min
Rapid Traverse Speed: X/Y/Z 30 m/min
NC Controller: FANUC 31i -B
Machine Dimensions: Approx. 6,000mm x 5,000mm x 4,000mm (including installation space)
Machine Weight: Approx. 25,000kg
CHIP CONVEYOR_HINGED BELT REAR SIDE
THROUGH SPINDLE COOLANT 30 BAR
CHIP BUCKET
FLOOD COOLANT PUMP
SPINDLE AIR CURTAIN
COOLANT GUN
AUTO POWER OFF
Options:
FANUC
Chip Conveyor
Coolant Thru Spindle
Chip Conveyor
Coolant Thru Spindle
Seller:
OlivK887
Location:
USA
Further Reading
