Used DOOSAN PUMA SMX3100 CNC Lathe

Pre-owned DOOSAN PUMA SMX3100 2015 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This DOOSAN CNC Lathe is available for a limited time. Get a quote today on this PUMA SMX3100 before it's gone.

Specs:

CAPACITY:
Swing over bed: 25.98"
Swing over carriage: 25.98"
Maximum bar capacity: 4.015”
Maximum turning diameter, main spindle: 25.98"
Max. permissible weight: (including chuck) 860 lbs
Maximum turning length: 60.63”

LEFT SPINDLE:
Chuck size: 12”
Spindle speed: 3,000 RPM
Spindle nose: A2-11
Left spindle draw tube ID: 4.055”
Spindle bore diameter: 4.52"
AC high torque spindle motor: 40 HP
Maximum spindle torque: 887 ft-lbs

LEFT SPINDLE C-AXIS:
Minimum programmable angle: 0.0001 Degrees
Rapid Traverse Rate: 200 RPM
C1-axis repeatability: +/- .003 deg.
C1-axis positioning accuracy: 0.0042 Degrees

MILLING SPINDLE
Spindle speed: 12,000 RPM
Motor power: 35 HP
Maximum spindle torque: 91 ft-lbs
Tool index (2, 3 or 4 insert multi-tools) 15 Degrees
B-axis (tilt) coupling increment Random Angle
B-axis clamping torque: (Max. without brake) 4374 ft-lbs
B-axis clamping torque: (Min. with low brake)104 ft-lbs
B-axis travel: 240 Degrees (+/- 120)
B-axis minimum increment 0.0001 deg
B-axis positioning accuracy 0.0042 deg.
B-axis repeatability +/- 0.003 deg.

BED, SADDLE, & CROSS SLIDE:
X1 (upper) axis travel: 24.8”
Z1 (upper) axis travel: 62.4”
Angle of slant bed 0 degrees
X1 axis rapid traverse rate: (48m/min) 1,890 IPM
Z1 axis rapid traverse rate: (48m/min) 1,890 IPM
X / Z axis ball screw diameter (40 / 50mm) 1.57" / 1.97”
X1 axis feed thrust: (continuous/intermittent) 2,823 / 4,235 lbs
Z1 axis feed thrust: (continuous/intermittent) 2,685 / 4,028 lbs
Y axis feed thrust: (continuous/intermittent) 2,067 / 3,100 lbs
X axis repeatability: (+.002mm) + 0.00008"
Z axis repeatability: (+.003mm) + 0.00012"

TAILSTOCK (Servo Driven):
Maximum tailstock quill thrust (10kN) 2,248 lbs
Tailstock travel (1562mm) 61.5”
Tailstock spindle taper (built-in type) MT #5
Tailstock guideway span (390mm) 15.35”

Y-AXIS:
Y-axis travel (300mm) 11.81” (+/- (150mm) 5.9”)
Y-axis rapid traverse rate (36m/min) 1,417 IPM
Y-axis repeatability (+.003mm) + 0.00012"

Automatic Tool Changer:
Tool storage capacity: 80 Position
Max. tool diameter: 3.54”
Max. tool diameter w/o adjacent tools (130mm) 5.12”
Max. tool length (450mm) 17.7”
Max. tool weight (12kg) 26.4 lbs.
Tool selection method Fixed
Tool change time (tool to tool) 1.8

COOLANT SYSTEM:
Milling spindle coolant pump pressure (10 bar) 145 PSI
Milling spindle coolant pump motor (2.2kW) 3.0 HP
Coolant tank capacity (560L) 148 gallons

EQUIPPED WITH:

Fanuc Control
Hydraulic Tailstock
80 Station Tool Storage Capacity (Option Purchased)
Y-Axis
Milling Head
CAPTO C6 Tooling Package Included

Machine Floor space: 193” L x 119” W x 109" H
Conveyor Floor space: 243”
Machine Weight: 35,940 lbs.

Voltage required 205-235 Volt / 3 phase
Power requirement 68 kVA (178 Amps @ 220 Volts


Price:
$259,000
Payment:
Owner:
Cris (Located in FL)
BUY NOW

Similar Listings