Used DOOSAN PUMA TT1800SY CNC Lathe

Pre-owned DOOSAN PUMA TT1800SY 2022 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This DOOSAN CNC Lathe is available for a limited time. Get a quote today on this PUMA TT1800SY before it's gone.

Specs:
Bar Capacity: 2.625"
Chuck Size: 8"
Spindle Speed: 5,000 RPM
Spindle Motor: 30 HP
X Axis Travel: 6.5"
X2 Axis Travels: 7.5"
Z Axis Travel: 31.5"
Z2 Axis Travels: 28.3"
Y Axis Travel: 3.9"
A Axis Travel: 30.3"
Rapid Rate Z Axis: 944 IPM
Rapid Rate X Axis: 787 IPM
Max Turning Dia: 9.1"
Max Turning Length: 38.5"
Max Swing: 9.1"

TURRET:
Turret Configuration (Upper + Lower): 12 + 12 (24 Total Stations)
O.D Tool Size: 0.8" x 0.8"
Maximum I.D. Tool Size: 1.3"
Turret Indexing Time: 0.15 Seconds
Maximum Rotary Tool Speed: 5,000 RPM

SUB & MAIN SPINDLE:
Spindle Speed: 5000 RPM
Spindle Motor (30 min / Cont): 29.5 HP / 20.1 HP
Maximum Spindle Torque: 153.5 Ft-Lbs
Spindle Nose: A2 #6
Spindle Bearing Diameter: 4.3"
Spindle Inner Diameter: 3.0"
C-Axis Indexing: 360° in .001° increments
Dimensions: 154" x 82" x 82"
Weight: 17,196 LBS

Parts count: 4959
Run time: 166 hours
Hrs are subject to change some as we are finishing up a job right now.
Options:
Fanuc OiTF
Chip Conveyor
Tool Presetter
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
5 Axis
Turbo Side Discharge Chip Conveyor with M-Code Capability ($8,200)
(2) Royal QG65 Compact Quick Change Collet Chuck $4,460)
(2) Doosan 145 PSI High Pressure Pump Upgrade ($4,400)
LNS Quick Load Servo 80 S2 Barfeed System ($24,800)
(4) X Axis Live Eppinger Preci-Flex Rotary Tool Holders
(2) Z Axis Live Eppinger Preci-Flex Rotary Tool Holders

Price:
$299,500
Payment:
Owner:
Brandon (Machine Shop in PA)
BUY NOW

Similar Listings