Used ENSHU JE60 Horizontal Machining Center

Pre-owned ENSHU JE60 1997 Horizontal Machining Center. This Horizontal Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This ENSHU Horizontal Machining Center is available for a limited time. Get a quote today on this JE60 before it's gone.

X Axis Travel: 23.6"
Y Axis Travel: 23.6"
Z Axis Travel: 23.6"
Rapid Rate X Axis: 1,181 IPM
Rapid Rate Y Axis: 1,181 IPM
Rapid Rate Z Axis: 1,181 IPM
Pallet Size: 15.75" x 15.75""
Max Pallet Load: 880 LBS
Spindle Speed: 13,000 RPM
Spindle Motor: 15 HP
Spindle Taper: 40 CT
Tool Changer: 60 ATC
cooler jacket for the spindle.
Spindle bearing diameter of 3.35”
Spindle is dual contact “Big Plus” Cat 40.
Does require specific pull studs on tools.
Max tool diameter of 3.1”/5.71” w/ adjacent pockets empty.
Max tool length 7.9”
Max tool weight 6.6 lbs.
Tool to tool change time 1 sec
Chip to Chip 3 seconds.
Spindle ramp up time of 1.5 seconds.
Oversized 1.772” double pretensioned ball screws.
Dimensions: 91" x 143" x 109"
Weight: 19,840 LBS
Yasnac i80
Chip Conveyor
360 Deg. Indexing Table
Karen (Machine Shop in FL)

Similar Listings