Pre-owned EPILOG LASER FUSION M2 2018 Laser. This Laser has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Arizona. This EPILOG LASER Laser is available for a limited time. Get a quote today on this FUSION M2 before it's gone.

32" x 20" (812 x 508 mm)
Maximum Material Thickness CO2: 13.5" (343 mm) (2" lens)
Fiber: 12.5" (318 mm) (3" lens)
Dual Source: 12.5" (318 mm) (3" lens)
Laser Wattage CO2: 75 Watts
Fiber: 30 or 50 watts
Dual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts
Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory Capacity Multiple file storage up to 128 MB.
Air Assist Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Fusion Series Lasers.
Operating Modes Optimized raster, vector or combined modes.
Motion Control System High-speed Brushless DC Servo Motors.
X-Axis Bearings Ground and polished stainless steel Long-Lasting Bearing System.
Belts Kevlar (x-axis) and Steel Cord (y-axis) belts.
Resolution User controlled from 75 to 1200 dpi.
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
Size (W x D x H) 52.5" x 33.75" x 40.75"
(1334 x 857 x 1035 mm)
37.75" (959 mm) deep with exhaust plenum.
Weight 500 lbs (227 kg)
Dual Source: 536 lbs (243 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
Maximum Table Weight Fusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter.

Our new standard for motion control design
Better flame-polished edge cuts
Our highest engraving and cutting speeds
Large viewing door with LED lighting
Dual source (fiber and CO2) and camera options available.
Terry (Machine Shop in USA)