Seller Needs:
$32,500|
27
|
0
Pre-owned FLOW M4-3020B 2011 Waterjet. This Waterjet has average cutting time and is equipped with a PC CNC Control control. This CNC Machine is currently located in USA. This FLOW Waterjet is available for a limited time. Get a quote today on this M4-3020B before it's gone.
Seller Needs:
Payment:
Specs:
X Axis Travel: "Approximately 118 inches (3,000 mm)
Y Axis Travel: "Approximately 78 inches (2,000 mm)
Z Axis Travel: "Approximately 7 inches (178 mm)
Weight: Approximately 16,000 lbs (7,257 kg)
Power: Typically equipped with a 50 HP Amps:200 Volts:240 pump delivering up to 87,000 PSI
Max Cutting Pressure: 87,000
Table Size: Approximately 6.6 feet (2,011.7 mm) in width and 9.8 feet (2,987 mm) in length
Control System: Flow PC-Based CNC with Flowmaster Xpert software
Operates Fine , Just need Replacement for Vacuum Pump for Using the Sand.
Y Axis Travel: "Approximately 78 inches (2,000 mm)
Z Axis Travel: "Approximately 7 inches (178 mm)
Weight: Approximately 16,000 lbs (7,257 kg)
Power: Typically equipped with a 50 HP Amps:200 Volts:240 pump delivering up to 87,000 PSI
Max Cutting Pressure: 87,000
Table Size: Approximately 6.6 feet (2,011.7 mm) in width and 9.8 feet (2,987 mm) in length
Control System: Flow PC-Based CNC with Flowmaster Xpert software
Operates Fine , Just need Replacement for Vacuum Pump for Using the Sand.
Seller:
KrisH817
Location:
USA
Further Reading