Used GROB G350 Horizontal Machining Center
Pre-owned GROB G350 2017 Horizontal Machining Center for only $439,900 $387,500. This Horizontal Machining Center has average cutting time and is equipped with a CNC (Siemens 840Dsl - GROB4Pilot) control. This CNC Machine is currently located in OH. This GROB Horizontal Machining Center is the only one in stock and available for a limited time. Get a quote today on this G350 before it's gone.
Specifications:
5 Axis CNC Mill For Sale
X Axis Travel: 23.6"
Y Axis Travel: 30.3"
Z Axis Travel: 29.5"
Rapid Rate X Axis: 2,560 IPM
Rapid Rate Y Axis: 1,650 IPM
Rapid Rate Z Axis: 3,540 IPM
Pallet Size: 15.75" x 15.75""
Max Pallet Load: 745 LBS
Spindle Speed: 16,000 RPM
Spindle Motor: 43 HP
Spindle Taper: HSK-A63 CT
Tool Changer: 117 ATC
GCS Swivel Axis Calibration
Kinematic Option
Cutting Fluid High Pressure Unit (145.0- 1160.3 PSI CTS)
Compressed Through Spindle Air
External Compressed air supply via flexibly adjustable hose
Oil Skimmer for cutting fluid care
Flushing Device (Z Axis)
Circulating Chiller for Cutting Fluid w/air-cooled cooling unit
Renishaw RMP600 Probe Type
3D Model of the Machine
Package to increase machine accuracy
Remote Machine Diagnostics with Access Control Switch
MT – Connect
Decentralized work area exhaust system: 800 m3
Electrical equipment according to USA/Canada Standard
Handheld Controller HT 8 Siemens
Interface (Software and Hardware) to the Pallet storage system PSS- Schuler Pilot NC+ Tool (SI, FA)
GROB Spindle Diagnostics GSD
Tool Cleaning Device
Electromechanical Tool Breakage Detection Device
Setup Station Door, Automatically Operation, for Automated load and unload
Dimensions: 106 x 157 x 106
Weight: 28,600 LBS
***Over $700K New***
***Under 500 Cutting Hours***
***R&D Machine Only***
X Axis Travel: 23.6"
Y Axis Travel: 30.3"
Z Axis Travel: 29.5"
Rapid Rate X Axis: 2,560 IPM
Rapid Rate Y Axis: 1,650 IPM
Rapid Rate Z Axis: 3,540 IPM
Pallet Size: 15.75" x 15.75""
Max Pallet Load: 745 LBS
Spindle Speed: 16,000 RPM
Spindle Motor: 43 HP
Spindle Taper: HSK-A63 CT
Tool Changer: 117 ATC
GCS Swivel Axis Calibration
Kinematic Option
Cutting Fluid High Pressure Unit (145.0- 1160.3 PSI CTS)
Compressed Through Spindle Air
External Compressed air supply via flexibly adjustable hose
Oil Skimmer for cutting fluid care
Flushing Device (Z Axis)
Circulating Chiller for Cutting Fluid w/air-cooled cooling unit
Renishaw RMP600 Probe Type
3D Model of the Machine
Package to increase machine accuracy
Remote Machine Diagnostics with Access Control Switch
MT – Connect
Decentralized work area exhaust system: 800 m3
Electrical equipment according to USA/Canada Standard
Handheld Controller HT 8 Siemens
Interface (Software and Hardware) to the Pallet storage system PSS- Schuler Pilot NC+ Tool (SI, FA)
GROB Spindle Diagnostics GSD
Tool Cleaning Device
Electromechanical Tool Breakage Detection Device
Setup Station Door, Automatically Operation, for Automated load and unload
Dimensions: 106 x 157 x 106
Weight: 28,600 LBS
***Over $700K New***
***Under 500 Cutting Hours***
***R&D Machine Only***
Equipped With:
CNC (Siemens 840Dsl - GROB4Pilot)
Probe
Coolant Thru Spindle
Programmable Coolant
360,000 Full 4th
Probe
Coolant Thru Spindle
Programmable Coolant
360,000 Full 4th
Seller:
Neil (Machine Shop in USA)
Answers
what city and state is this machine located in?
Cincinnati OH
when do you need it out by?
Now, now rush
what are the hours?
Under 500
any mechanical or electrical Issues?
Like new
why are you thinking of selling it?
Used for "It Speaks" project. very similar to Alexa for amazon. will be for CNC machines voice control
any options?
tons
what did it cost when it was new?
720k new
Answers
what city and state is this machine located in?
Cincinnati OH
when do you need it out by?
Now, now rush
what are the hours?
Under 500
any mechanical or electrical Issues?
Like new
why are you thinking of selling it?
Used for "It Speaks" project. very similar to Alexa for amazon. will be for CNC machines voice control
any options?
tons
what did it cost when it was new?
720k new
