This 2009 HAAS MINI MILL Vertical Machining Center is a quality machine with a reputation for its dependable operation. Being versatile in nature, it is a good solution for both small and large milling operations.
HAAS...Read More
Seller Needs:
Payment:
Specs:
2009 Haas Mini Mill CNC Vertical Machining Center
New Spindle
16"x14"x15" Travel, 4th Axis ready, Brushless Drive,
10 Station ATC
Table Size: 36" x 12"
Machine Control: Haas 32-Bit,
Travel (x/y/x) 16"x12"x10
Table capacity 500 lbs, Spindle
Taper: CAT 40, Spindle
Speeds: 6,000 Max RPM
Rapid Traverse Rate (x,y,z): 600 IPM
Spindle table distance: 4"-14"
Max Cutting Feed Rate: 500 IPM
Carousel tool changer 10 stations
Tool change time 4.2 seconds
Spindle drive: 7.5 hp,
Coolant Capacity: 40 Gal Standard
Air Required 100 PSI
Full Load AMPS 13/25
Input Voltage 220 Single or Three Phase
Table Size: 28.75" x 12"
Weight: 4,000 LBS
Equipped with: Haas 32-Bit CNC Control, 10 station automatic tool changer,
Rapid tapping, 4th axis brushless drive, USB drive, Enclosure cover, Coolant System,
Macros Spindle orientation, Coordinate Rotation and scaling, Visual quick code programming
manuals, and Documentation.
Please check my other listing for a Haas TL-1 Lathe. If interested in both I would be willing to negotiate.
Machine is located in Sanford Florida
OBO
New Spindle
16"x14"x15" Travel, 4th Axis ready, Brushless Drive,
10 Station ATC
Table Size: 36" x 12"
Machine Control: Haas 32-Bit,
Travel (x/y/x) 16"x12"x10
Table capacity 500 lbs, Spindle
Taper: CAT 40, Spindle
Speeds: 6,000 Max RPM
Rapid Traverse Rate (x,y,z): 600 IPM
Spindle table distance: 4"-14"
Max Cutting Feed Rate: 500 IPM
Carousel tool changer 10 stations
Tool change time 4.2 seconds
Spindle drive: 7.5 hp,
Coolant Capacity: 40 Gal Standard
Air Required 100 PSI
Full Load AMPS 13/25
Input Voltage 220 Single or Three Phase
Table Size: 28.75" x 12"
Weight: 4,000 LBS
Equipped with: Haas 32-Bit CNC Control, 10 station automatic tool changer,
Rapid tapping, 4th axis brushless drive, USB drive, Enclosure cover, Coolant System,
Macros Spindle orientation, Coordinate Rotation and scaling, Visual quick code programming
manuals, and Documentation.
Please check my other listing for a Haas TL-1 Lathe. If interested in both I would be willing to negotiate.
Machine is located in Sanford Florida
OBO
Seller:
LexiM865
Location:
USA
