Seller Needs:
$39,500|
24
|
0
This 2011 HAAS ST30 is a valuable asset for any workshop looking to enhance its machining capabilities. Featuring essential options such as a Chip Conveyor, Tool Presetter, Tailstock, and Parts Catcher, this machine is equipp...Read More
Seller Needs:
Payment:
Specs:
Bar Capacity: 3"
Chuck Size: 10"
Spindle Speed: 3,400 RPM
Spindle Motor: 40 HP
X Axis Travel: 12.5"
Z Axis Travel: 26"
Rapid Rate Z Axis: 945 IPM
Turret Tools: 12 Station
Rapid Rate X Axis: 945 IPM
Max Turning Dia: 21"
Max Turning Length: 26"
Max Swing: 31"
Max Thrust X: 4100 lbf
Max Thrust Z: 5100 lbf
Spindle Nose: A2-8
Max Torque: 300 ft-lbf
Spindle Bore: 3.5"
Coolant Cap: 55 gal
Dimensions: 171" x 90" x 98"
Weight: 14,000 LBS
2011 Haas ST30 CNC Lathe - One owner - avg. power up hours 29 per week - avg. run time hours 27 per week. Professionally serviced by Haas technicians since purchased new.
Includes: Programmable hydraulic tailstock, Parts catcher system, High intensity lighting, Chip conveyor, Automatic tool presetter, Visual quick code, Coolant nozzle block,
Chuck Size: 10"
Spindle Speed: 3,400 RPM
Spindle Motor: 40 HP
X Axis Travel: 12.5"
Z Axis Travel: 26"
Rapid Rate Z Axis: 945 IPM
Turret Tools: 12 Station
Rapid Rate X Axis: 945 IPM
Max Turning Dia: 21"
Max Turning Length: 26"
Max Swing: 31"
Max Thrust X: 4100 lbf
Max Thrust Z: 5100 lbf
Spindle Nose: A2-8
Max Torque: 300 ft-lbf
Spindle Bore: 3.5"
Coolant Cap: 55 gal
Dimensions: 171" x 90" x 98"
Weight: 14,000 LBS
2011 Haas ST30 CNC Lathe - One owner - avg. power up hours 29 per week - avg. run time hours 27 per week. Professionally serviced by Haas technicians since purchased new.
Includes: Programmable hydraulic tailstock, Parts catcher system, High intensity lighting, Chip conveyor, Automatic tool presetter, Visual quick code, Coolant nozzle block,
Options:
HAAS CNC Control
Chip Conveyor
Tool Presetter
Tailstock
Parts Catcher
Chip Conveyor
Tool Presetter
Tailstock
Parts Catcher
Seller:
MarkP815
Location:
USA
Further Reading