
Machine Overview
This 2016 HAAS TM1P is a great addition to your machining setup. It's designed to handle various tasks with precision and ease.
With an X-Axis Travel of 30 inches, Y-Axis Travel of 12 inches, and Z-Axis Travel of 16 inches, this machine is built to accommodate a range of movement. The Spindle Nose to Table measures from 4 to 20 inches, allowing for versatility in part sizes.
The spindle operates at a speed of 6,000 RPM and features a CAT 40 taper. Powering the spindle is a 7.5 HP motor. The table provides ample space with dimensions of 47.8 x 10.5 inches and can support a maximum weight of 1,000 lbs.
When it comes to speed, the machine offers a rapid traverse rate of 400 inches per minute and a maximum cutting feed rate of 400 inches per minute. It also comes with an automatic tool changer that holds up to 10 positions, simplifying the process of switching tools.
The machine’s dimensions are 96 inches wide, 68 inches front to back, with a height of 86 inches for shipping and a maximum operational height of 105 inches. It runs on a 220 Volt, 3-phase, 60 Hz power supply and draws 25 amps.
Additional features include rigid tapping and a chip auger, which add convenience and help manage production smoothly.
This used machine can fit well into various workshop environments and handle different machining tasks. If you're seeking a machine with these specifications, consider this HAAS TM1P for your needs.
Machine Comps
