Seller Needs:
$53,000|
112
|
0
This 2019 HAAS TM3P comes with a probe and a range of options to support your machining needs. This model is in remarkable shape, boasting low hours. It's ready to go and currently under power.
Enjoy generous travel measurem...Read More
Seller Needs:
Payment:
Specs:
2019 model. Low hours, very clean, and excellent condition. Currently under power.
X Axis Travel: 40"
Y Axis Travel: 20"
Z Axis Travel: 16"
Spindles
* 10,000-rpm Grease-Packed Spindle
Tool changer -20 tool changer
4th- | 5th-Axis
* 4th-Axis Drive and Wiring
Probing
-Wireless Intuitive Probing System - work and spindle probe
Chip & Coolant Management
* High-Flow Coolant Pump
* Chip auger
The Haas Control options
* Next gen control
* High-Speed Machining
* Rigid Tapping
* Spindle Orientation
* Coordinate Rotation and Scaling
* Dynamic Work Offsets DWO
Product Options
* Standard Work Light + upgraded light system
* Convenience Package
* Add on air nozzle system
Tooling- work holding included with machine
-Saunders Machine Works fixture plate and mod vices (3x + some extras). Awesome flexible tooling system!
-Assortment of 1/2" bolts to work with the SMW system
-couple packs of Miteebite
-Lathe block system - turn your mill into a lathe!
Tooling
ER collet chucks- most of them with only minutes of spindle time and some are brand new
-ER16 13pc and 37 collets
-ER25 11pc and 33 collets
-Er32 5pc and 6x 3/4" collets
-ER40 1pc with 1" ER collet
-Face mill
-Haas chip fan
-ER Collet wrenches
-Slimline collet chuck and 3 long reach shrink fit holders
Carbide- too much to list, see the pictures. Most of them are new or with only minutes of use. Square, bull nose, ball, chamfer, thread mill, undercutting ball, key slot, slot, indexible chamfer mill, Forming taps.. Helical, Lakeshore, Redline, MA Ford, Haas and others.
Haas cobalt jobber drill set 1/16-1/2". Only 4 of them have been used. Various other drills.
Inspection
-Micrometers: A new Mitutoyo digital, various analog up to 125mm. Scherr Tumico thread mic, blade mic.
-Interapid dial Indicator
-Noga base
-Shars long reach indicator
-gage pins 0.011-.625" complete in 0.001" incriments
-thread pin set
-gage blocks 2 partial sets
-parallel set
Refractometer
As stated this machine is in great condition. Just add your power, air, coolant, code, and start cutting!
X Axis Travel: 40"
Y Axis Travel: 20"
Z Axis Travel: 16"
Spindles
* 10,000-rpm Grease-Packed Spindle
Tool changer -20 tool changer
4th- | 5th-Axis
* 4th-Axis Drive and Wiring
Probing
-Wireless Intuitive Probing System - work and spindle probe
Chip & Coolant Management
* High-Flow Coolant Pump
* Chip auger
The Haas Control options
* Next gen control
* High-Speed Machining
* Rigid Tapping
* Spindle Orientation
* Coordinate Rotation and Scaling
* Dynamic Work Offsets DWO
Product Options
* Standard Work Light + upgraded light system
* Convenience Package
* Add on air nozzle system
Tooling- work holding included with machine
-Saunders Machine Works fixture plate and mod vices (3x + some extras). Awesome flexible tooling system!
-Assortment of 1/2" bolts to work with the SMW system
-couple packs of Miteebite
-Lathe block system - turn your mill into a lathe!
Tooling
ER collet chucks- most of them with only minutes of spindle time and some are brand new
-ER16 13pc and 37 collets
-ER25 11pc and 33 collets
-Er32 5pc and 6x 3/4" collets
-ER40 1pc with 1" ER collet
-Face mill
-Haas chip fan
-ER Collet wrenches
-Slimline collet chuck and 3 long reach shrink fit holders
Carbide- too much to list, see the pictures. Most of them are new or with only minutes of use. Square, bull nose, ball, chamfer, thread mill, undercutting ball, key slot, slot, indexible chamfer mill, Forming taps.. Helical, Lakeshore, Redline, MA Ford, Haas and others.
Haas cobalt jobber drill set 1/16-1/2". Only 4 of them have been used. Various other drills.
Inspection
-Micrometers: A new Mitutoyo digital, various analog up to 125mm. Scherr Tumico thread mic, blade mic.
-Interapid dial Indicator
-Noga base
-Shars long reach indicator
-gage pins 0.011-.625" complete in 0.001" incriments
-thread pin set
-gage blocks 2 partial sets
-parallel set
Refractometer
As stated this machine is in great condition. Just add your power, air, coolant, code, and start cutting!
Options:
Probe
Seller:
AustG797
Location:
USA
Further Reading