Seller Needs:
Make Offer|
57
|
0
This 2014 HAAS VF12 is ready to meet your machining needs with an array of valuable features and options. Equipped with a Probe, Programmable Coolant, and a 4th Axis Rotary Table, this machine enhances your production capabil...Read More
Seller Needs:
Payment:
Call For Financing
Specs:
X Axis Travel: 150"
Y Axis Travel: 32"
Z Axis Travel: 30"
Rapid Rate X Axis: 360 IPM
Rapid Rate Y Axis: 600 IPM
Rapid Rate Z Axis: 600 IPM
Max Table Load: 4,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 8,100 RPM
Spindle Taper: 40
Tool Changer: 24 ATC
Max Cutting: 360 ipm
Max Torque: 90 ft-lbf
Max Thrust X: 3400 lbf
Max Thrust Y: 3400 lbf
Max Thrust Z: 5600 lbf
Max Tool Length: 16"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s
Table Size: 150" x 28"
Dimensions: 348" x 110" x 130"
Weight: 37,200 LBS
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
Y Axis Travel: 32"
Z Axis Travel: 30"
Rapid Rate X Axis: 360 IPM
Rapid Rate Y Axis: 600 IPM
Rapid Rate Z Axis: 600 IPM
Max Table Load: 4,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 8,100 RPM
Spindle Taper: 40
Tool Changer: 24 ATC
Max Cutting: 360 ipm
Max Torque: 90 ft-lbf
Max Thrust X: 3400 lbf
Max Thrust Y: 3400 lbf
Max Thrust Z: 5600 lbf
Max Tool Length: 16"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s
Table Size: 150" x 28"
Dimensions: 348" x 110" x 130"
Weight: 37,200 LBS
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
Options:
HAAS CNC Control
Probe
Chip Conveyor
Coolant Thru Spindle
Programmable Coolant
4th Axis Rotary Table
Haas HRT-210SP 4th Axis Rotary Table,
Renishaw Probe Ready (No spindle probe or tool setter with machine)
24 ATC Side-Mount Tool Changer
High-Speed Machining
4th Axis Drive & Wiring
Through Coolant Spindle (300 PSI)
Remote Jog Handle
Coordinate Rotation & Scaling
Spindle Orientation
Rigid Tapping
Macros
USB Port
Early Power-Fault Detection Module
An Assortment of CAT40 Tool Holders
Internal High Voltage Isolated Transformer (Machine Set-up to run on 354-488V)
Probe
Chip Conveyor
Coolant Thru Spindle
Programmable Coolant
4th Axis Rotary Table
Haas HRT-210SP 4th Axis Rotary Table,
Renishaw Probe Ready (No spindle probe or tool setter with machine)
24 ATC Side-Mount Tool Changer
High-Speed Machining
4th Axis Drive & Wiring
Through Coolant Spindle (300 PSI)
Remote Jog Handle
Coordinate Rotation & Scaling
Spindle Orientation
Rigid Tapping
Macros
USB Port
Early Power-Fault Detection Module
An Assortment of CAT40 Tool Holders
Internal High Voltage Isolated Transformer (Machine Set-up to run on 354-488V)
Seller:
MarkP815
Location:
USA
Further Reading
