Seller Needs:
$39,500|
121
|
0
Pre-owned HAAS VF2 2014 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This HAAS Vertical Machining Center is available for a limited time. Get a quote today on this VF2 before it's gone.
Seller Needs:
Payment:
Specs:
X Axis Travel: 30"
Y Axis Travel: 16"
Z Axis Travel: 20"
Rapid Rate X Axis: 1,000 IPM
Rapid Rate Y Axis: 1,000 IPM
Rapid Rate Z Axis: 1,000 IPM
Table Size:
Max Table Load: 3,000 LBS
Spindle Motor: 20 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 40
Tool Changer: 21 ATC
Max Torque: 90 ft-lbf
Max Thrust X: 2550 lbf
Max Thrust Y: 2550 lbf
Max Thrust Z: 4200 lbf
Max Tool Diameter: 3.5"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 4.2 s
Chip-to-Chip (avg): 4.5 s
Dimensions:
Weight: 7,500 LBS
Lots of Extras...
2014 haas vf-2 in good condition no issues whatsoever
Hours pictured
Machine comes with…
18 complete tool holders
11 tool holders that are missing collets and locking rings
2 6” Kurt vises
Pierson pallet system which includes 1 large pallet that has mitee bite clamps installed and 1 blank large pallet and 2 black smaller pallets
2 hard jaw sets multiple cut soft jaws
Variety of tooling including 3d haimer and shell mill
Edge technology tool setter
2 edge technology multi axis stops
And more
Y Axis Travel: 16"
Z Axis Travel: 20"
Rapid Rate X Axis: 1,000 IPM
Rapid Rate Y Axis: 1,000 IPM
Rapid Rate Z Axis: 1,000 IPM
Table Size:
Max Table Load: 3,000 LBS
Spindle Motor: 20 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 40
Tool Changer: 21 ATC
Max Torque: 90 ft-lbf
Max Thrust X: 2550 lbf
Max Thrust Y: 2550 lbf
Max Thrust Z: 4200 lbf
Max Tool Diameter: 3.5"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 4.2 s
Chip-to-Chip (avg): 4.5 s
Dimensions:
Weight: 7,500 LBS
Lots of Extras...
2014 haas vf-2 in good condition no issues whatsoever
Hours pictured
Machine comes with…
18 complete tool holders
11 tool holders that are missing collets and locking rings
2 6” Kurt vises
Pierson pallet system which includes 1 large pallet that has mitee bite clamps installed and 1 blank large pallet and 2 black smaller pallets
2 hard jaw sets multiple cut soft jaws
Variety of tooling including 3d haimer and shell mill
Edge technology tool setter
2 edge technology multi axis stops
And more
Options:
Rigid tapping
Seller:
DylaS462
Location:
USA
Further Reading