Used HAAS VF3B Vertical Machining Center
Pre-owned HAAS VF3B 2001 Vertical Machining Center for only $22,500 $21,500. This Vertical Machining Center has average cutting time and is equipped with a Haas CNC Control control. This CNC Machine is currently located in KY. This HAAS Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this VF3B before it's gone.
Specifications:
X Axis Travel: 40"
Y Axis Travel: 20"
Z Axis Travel: 25"
Rapid Rate X Axis: 1,000 IPM
Rapid Rate Y Axis: 1,000 IPM
Rapid Rate Z Axis: 1,000 IPM
Table Size: 48" X 18"
Max Table Load: 3,500 LBS
Spindle Motor: 20 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 40 CT
Tool Changer: 20 ATC
Max Torque 90 ft-lbf
Max Cutting 650 ipm
Max Thrust X 2550 lbf
Max Thrust Y 2550 lbf
Max Thrust Z 4200 lbf
Max Tool Diameter 3.5"
Max Tool Weight 12 lbs
Tool-to-Tool 4.2 s
Chip-to-Chip 4.5 s
Dimensions: 131" x 92" x 101"
Weight: 13,500 LBS
Y Axis Travel: 20"
Z Axis Travel: 25"
Rapid Rate X Axis: 1,000 IPM
Rapid Rate Y Axis: 1,000 IPM
Rapid Rate Z Axis: 1,000 IPM
Table Size: 48" X 18"
Max Table Load: 3,500 LBS
Spindle Motor: 20 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 40 CT
Tool Changer: 20 ATC
Max Torque 90 ft-lbf
Max Cutting 650 ipm
Max Thrust X 2550 lbf
Max Thrust Y 2550 lbf
Max Thrust Z 4200 lbf
Max Tool Diameter 3.5"
Max Tool Weight 12 lbs
Tool-to-Tool 4.2 s
Chip-to-Chip 4.5 s
Dimensions: 131" x 92" x 101"
Weight: 13,500 LBS
Equipped With:
Haas CNC Control
Programmable Coolant
Wired for 4th Axis
Tool Presetter
Chip Auger
Remote Jog Handle
NEW Vector Drive
NEW Servo Motors
Programmable Coolant
Wired for 4th Axis
Tool Presetter
Chip Auger
Remote Jog Handle
NEW Vector Drive
NEW Servo Motors
Seller:
Nathaniel (Machine Shop in USA)
Answers
any options?
programmable coolant nozzle, tool presetter, remote job handle
RPM- 8000
4th Axis ready
Chip Auger
new vector drive and new servo motors. they put in about $4k in new parts
any mechanical or electrical Issues?
a little rough looking inside.
what are the hours?
POWER ON: 11021
CYCLE START TIME: 3898
FEED CUTTING TIME: 3013
when do you need it out by?
7/10- getting new machine in. he will load at the same time
Answers
any options?
programmable coolant nozzle, tool presetter, remote job handle
RPM- 8000
4th Axis ready
Chip Auger
new vector drive and new servo motors. they put in about $4k in new parts
any mechanical or electrical Issues?
a little rough looking inside.
what are the hours?
POWER ON: 11021
CYCLE START TIME: 3898
FEED CUTTING TIME: 3013
when do you need it out by?
7/10- getting new machine in. he will load at the same time
