Pre-owned HAAS VF4 1999 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Oregon. This HAAS Vertical Machining Cent...Read More
Seller Needs:
Payment:
Specs:
X Axis Travel: 50"
Y Axis Travel: 20"
Z Axis Travel: 25"
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Max Table Load: 3,500 LBS
Spindle Motor: 20 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 40
Tool Changer: 20 ATC
Max Thrust X: 2550 lbf
Max Thrust Y: 2550 lbf
Max Thrust Z: 4200 lbf
Max Cutting: 650 ipm
Max Torque: 90 ft-lbf
Spindle Nose: 4.2" - 29.2"
Drive System: Inline Direct-Drive
Tool-to-Tool: 4.2 sec change
Coolant Capacity: 55 gal
Table Size: 52" x 18"
Weight: 13,300 LBS
Electrics: 208-230 Volt, 3 Phase, 50-60 Cycle, FLA: 40 Amps
1st-owner machine; in cherry condition. Relatively low hours for age. Taken from high tech shop; not run as a production machine. Has been an excellent machine for current owner. Machine has been replaced on October 10th, 2024. This is a cream puff of a machine!
Buyer responsible for freight logistics and expenses.
Y Axis Travel: 20"
Z Axis Travel: 25"
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Max Table Load: 3,500 LBS
Spindle Motor: 20 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 40
Tool Changer: 20 ATC
Max Thrust X: 2550 lbf
Max Thrust Y: 2550 lbf
Max Thrust Z: 4200 lbf
Max Cutting: 650 ipm
Max Torque: 90 ft-lbf
Spindle Nose: 4.2" - 29.2"
Drive System: Inline Direct-Drive
Tool-to-Tool: 4.2 sec change
Coolant Capacity: 55 gal
Table Size: 52" x 18"
Weight: 13,300 LBS
Electrics: 208-230 Volt, 3 Phase, 50-60 Cycle, FLA: 40 Amps
1st-owner machine; in cherry condition. Relatively low hours for age. Taken from high tech shop; not run as a production machine. Has been an excellent machine for current owner. Machine has been replaced on October 10th, 2024. This is a cream puff of a machine!
Buyer responsible for freight logistics and expenses.
Options:
Haas CNC
Programmable Coolant
4th Axis Rotary Table
TR310 Trunnion Table, NEW, NEVER INSTALLED, Sold Separately (working on price)
Rigid Tapping
Coolant System
Chip Auger
Remote Pulse Generator (Pendant)
Nitrogen Charged Z-Axis Counterbalance
(2) Serial Ports
USB Port
Programmable Coolant
4th Axis Rotary Table
TR310 Trunnion Table, NEW, NEVER INSTALLED, Sold Separately (working on price)
Rigid Tapping
Coolant System
Chip Auger
Remote Pulse Generator (Pendant)
Nitrogen Charged Z-Axis Counterbalance
(2) Serial Ports
USB Port
Seller:
JerrS494
Location:
OR
Further Reading