HAAS VF5-50 CNC Mill


Message Seller: Kenny (Machine Shop in USA)

Used HAAS VF5-50 Vertical Machining Center

Pre-owned HAAS VF5-50 2018 Vertical Machining Center for only $119,900. This Vertical Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in WI. This HAAS Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this VF5-50 before it's gone.

X Axis Travel: 50"
Y Axis Travel: 26"
Z Axis Travel: 25"
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Table Size: 52" x 23"
Max Table Load: 4,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 7,500 RPM
Spindle Taper: 50 CT
Tool Changer: 60 ATC
Drive System 2-Speed Gearbox
Max Torque 340 ft-lbt
Max Weight 4,000 lbs
Max Cutting 500 ipm
Max Thrust X 3400 lbf
Max Thrust Y 4100 lbf
Max Thrust Z 5600 lbf
Max Tool Diameter 4"
Max Tool Diameter 10"
Max Tool Length 16"
Max Tool Weight 30 lb
Tool-to-Tool (avg) 4.2 s
Chip-to-Chip (avg) 6.3 s
Dimensions: 168" x 102 x 125
Weight: 16,250 LBS
Equipped With:
Coolant Thru Spindle
Programmable Coolant
Chip Auger
Wireless Intuitive Programming System
Rigid Tapping
1000 PSI Through Spindle Coolant
Early Failure Detection Module
15 Color LSD Display
95 Gallon Flood Coolant System
Thought Tool Airblast
Color Remote Jog Handle
710 IPM Rapid Traverse Rates
Kenny (Machine Shop in USA)
q-a icon
any options?
USB Port 15" Color LCD Display 1 GB Memory Ethernet Early Power Failure Detection Module Rigid Tapping Memory Lock Keyswitch 7,500 RPM, 30HP Spindle In-Line 30Tool ATC 710 IPM Rapid Traverse Rates Color Remote Jog Handle Programmable Coolant Nozzle Chip Auger 95 Gallon Flood Coolant System TSC1K, 1000PSI Through Coolant Spindle TAB, Though Tool Air Blast HSM HV-ISO-XFRMR, High Voltage Transformer WIPS, Wireless Intuitive Probing System Productivity Service 1,000 PSI Pressure Relief
what kind of parts and material are you cutting?
We cut softer steel 32 rc and under
what are the hours?
POWER ON TIME: 9429:18:22
what did it cost when it was new?
any mechanical or electrical Issues?
great, clean, low hours
when do you need it out by?
any tooling included?

I bought a used Haas VF2SS with a 5 Axis Trunnion from CNC Machines. The transaction was smooth and the machine was rigged and delivered to my shop in perfect condition.

Morgan K.

Morgan Meredith Inc.