Seller Needs:
$41,500|
68
|
3
Pre-owned HAAS VF5SS 2012 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a HAAS CNC Control control. This CNC Machine is currently located in California. This HAAS Vertical Machining Center is available for a limited time. Get a quote today on this VF5SS before it's gone.
Seller Needs:
Payment:
Specs:
X Axis Travel: 50"
Y Axis Travel: 26"
Z Axis Travel: 25"
Rapid Rate X Axis: 1,200 IPM
Rapid Rate Y Axis: 1,200 IPM
Rapid Rate Z Axis: 1,200 IPM
Table Size: 52" x 23"
Max Table Load: 1,750 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40
Tool Changer: 24 ATC
Spindle Nose to Table: 4.2" - 29.2"
Max Torque: 90 ft-lbf
Drive System: Inline Direct-Drive
Max Cutting: 833 ipm
Max Thrust X: 3,350 lbf
Max Thrust Y: 3,350 lbf
Max Thrust Z: 3,350 lbf
Max Tool Diameter (full): 2.5"
Max Tool Diameter (empty): 5"
Max Tool Length: 16"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s
Dimensions: 168" x 101" x 109"
Weight: 12,700 LBS
Y Axis Travel: 26"
Z Axis Travel: 25"
Rapid Rate X Axis: 1,200 IPM
Rapid Rate Y Axis: 1,200 IPM
Rapid Rate Z Axis: 1,200 IPM
Table Size: 52" x 23"
Max Table Load: 1,750 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40
Tool Changer: 24 ATC
Spindle Nose to Table: 4.2" - 29.2"
Max Torque: 90 ft-lbf
Drive System: Inline Direct-Drive
Max Cutting: 833 ipm
Max Thrust X: 3,350 lbf
Max Thrust Y: 3,350 lbf
Max Thrust Z: 3,350 lbf
Max Tool Diameter (full): 2.5"
Max Tool Diameter (empty): 5"
Max Tool Length: 16"
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s
Dimensions: 168" x 101" x 109"
Weight: 12,700 LBS
Options:
HAAS CNC Control
Probe
Chip Conveyor
4th Axis Rotary Table
HRT 4th Axis Rotary Table
Haas Chip Lift
Remote Jog Handle
High Intensity Lighting
Probe
Chip Conveyor
4th Axis Rotary Table
HRT 4th Axis Rotary Table
Haas Chip Lift
Remote Jog Handle
High Intensity Lighting
Seller:
TinaM773
Location:
CA
Further Reading
