Used HURCO BX30U Vertical Machining Center
Pre-owned HURCO BX30U 2012 Vertical Machining Center for only $99,500. This Vertical Machining Center has average cutting time and is equipped with a Hurco Winmax Control control. This CNC Machine is currently located in IL. This HURCO Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this BX30U before it's gone.
Specifications:
X Axis Travel: 30"
Y Axis Travel: 22"
Z Axis Travel: 22"
Rapid Rate X Axis: 1575
Rapid Rate Y Axis: 1575
Rapid Rate Z Axis: 1575
Cutting Feed Rate: 600
Additional Machine Specs: Table Diameter: 9.78"
Diameter inside the trunnion: 15.75”
Spindle Speed: 18,000
Spindle Taper Type: HSK63
Spindle Taper: HSK63A Tools
Tool Changer: Side Mount
Programmable Feed: 600IPM
Coolant Types: Thru-Spindle Coolant
Coolant PSI: 300 PSI
Dimensions: 157" x 134.8" x 127"
Weight: 16,094
Y Axis Travel: 22"
Z Axis Travel: 22"
Rapid Rate X Axis: 1575
Rapid Rate Y Axis: 1575
Rapid Rate Z Axis: 1575
Cutting Feed Rate: 600
Additional Machine Specs: Table Diameter: 9.78"
Diameter inside the trunnion: 15.75”
Spindle Speed: 18,000
Spindle Taper Type: HSK63
Spindle Taper: HSK63A Tools
Tool Changer: Side Mount
Programmable Feed: 600IPM
Coolant Types: Thru-Spindle Coolant
Coolant PSI: 300 PSI
Dimensions: 157" x 134.8" x 127"
Weight: 16,094
Equipped With:
Hurco Winmax Control
Chip Conveyor
Coolant Thru Spindle
Programmable Coolant
5 Axis
5th Axis Trunnion Table
Spindle Chiller
Coolant Wash Down
Renishaw spindle probe and laser tool probe
on-control simulation
2.5 arc second encoders on A and C-axis
tool centerpoint management and coordinate rotation and scaling
Chip Conveyor
Coolant Thru Spindle
Programmable Coolant
5 Axis
5th Axis Trunnion Table
Spindle Chiller
Coolant Wash Down
Renishaw spindle probe and laser tool probe
on-control simulation
2.5 arc second encoders on A and C-axis
tool centerpoint management and coordinate rotation and scaling
Video:
Seller:
Kurt (Machine Shop in USA)
Answers
any options?
18k RPM HSK63a spindle w/chiller
Autodoor currently setup with Fanuc M-6i
Answers
any options?
18k RPM HSK63a spindle w/chiller
Autodoor currently setup with Fanuc M-6i
