Seller Needs:
$199,000|
689
|
0
Pre-owned KELLENBERGER KELVARIAR175 2010 Grinding. This Grinding has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Florida. This KELLENBERGER Grinding is available for a lim...Read More
Seller Needs:
Payment:
Specs:
2010 Kellenberger KEL-VARIA UR 175/1000 CNC Cylindrical Grinder
CAPACITY
Distance between centers: 39.37”
Height of centers: 6.89”
Max swing over table: 9.80”
TABLE (Z-Axis)
Max travel: 43.90”
Feed rates: .000010 - .009990
Table feed: .1 – 394
Jogging feeds: .000100
Rapid traverse: 394”min
Dwell of reversal: 0-99
Max swivel: 9 degrees
WHEELSLIDE (X-Axis)
Max travel: 10.62”
Cont. infeed rates: .000010 - .009990
Incremental infeed per table reversal: .000010 - .009990
Discontinuous infeed per step: .000100
Rapid traverse: 394” min
WHEELHEAD
GW for cylindrical grinding: 16” x 2.5” x 5”
GW for right hand spindle end: 9” x 0.75” x 3”
Power of motor: 4.4 kw
Spindle speed: 1750 rpm
Grinding wheelhead swivels: 270 degrees
With indexed stop every: 90 degrees
Internal grinding spindle carrier dia: 70 (80)mm
WORKHEAD
Swivel: 360 degrees
Spindle speeds (programmable): 5 – 500 rpm
Internal taper of spindle: #5 morse
Adapter: #4/5 morse
Power of motor: 2.4 kw
CAPACITY
Distance between centers: 39.37”
Height of centers: 6.89”
Max swing over table: 9.80”
TABLE (Z-Axis)
Max travel: 43.90”
Feed rates: .000010 - .009990
Table feed: .1 – 394
Jogging feeds: .000100
Rapid traverse: 394”min
Dwell of reversal: 0-99
Max swivel: 9 degrees
WHEELSLIDE (X-Axis)
Max travel: 10.62”
Cont. infeed rates: .000010 - .009990
Incremental infeed per table reversal: .000010 - .009990
Discontinuous infeed per step: .000100
Rapid traverse: 394” min
WHEELHEAD
GW for cylindrical grinding: 16” x 2.5” x 5”
GW for right hand spindle end: 9” x 0.75” x 3”
Power of motor: 4.4 kw
Spindle speed: 1750 rpm
Grinding wheelhead swivels: 270 degrees
With indexed stop every: 90 degrees
Internal grinding spindle carrier dia: 70 (80)mm
WORKHEAD
Swivel: 360 degrees
Spindle speeds (programmable): 5 – 500 rpm
Internal taper of spindle: #5 morse
Adapter: #4/5 morse
Power of motor: 2.4 kw
Seller:
JessR609
Location:
FL
Further Reading
