Used KITAMURA MYCENTER 3XI Vertical Machining Center
Pre-owned KITAMURA MYCENTER 3XI 2005 Vertical Machining Center for only $24,900 $18,500. This Vertical Machining Center has average cutting time and is equipped with a Fanuc Series 16i-M control. This CNC Machine is currently located in MN. This KITAMURA Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this MYCENTER 3XI before it's gone.
Specifications:
X Axis Travel: 29.9"
Y Axis Travel: 17.9"
Z Axis Travel: 18.1"
Rapid Rate X Axis: 1,969 IPM
Rapid Rate Y Axis: 1,969 IPM
Rapid Rate Z Axis: 1,969 IPM
Table Size: 32.3" - 16.1"
Max Table Load: 1,540 LBS
Spindle Motor: 20 HP
Spindle Speed: 15,000 RPM
Spindle Taper: 40 CT
Tool Changer: 30 ATC
Cutting Feed rate: 1417"
Distance from Table to Spindle Nose: 5.1"– 23.2"
Distance from Column to Table Center: 8.5" – 26.4"
Max Tool Dia.: 3.1"
Max Tool Length: 11.8"
Tool Change Time: 1.2 Sec
Air Required: 80 psi, 4 scfm
Power: 25kva / 205-220v / 66FLA / 3-Phase
Dimensions: 168" x 95" x 100"
Weight: 16,500 LBS
Y Axis Travel: 17.9"
Z Axis Travel: 18.1"
Rapid Rate X Axis: 1,969 IPM
Rapid Rate Y Axis: 1,969 IPM
Rapid Rate Z Axis: 1,969 IPM
Table Size: 32.3" - 16.1"
Max Table Load: 1,540 LBS
Spindle Motor: 20 HP
Spindle Speed: 15,000 RPM
Spindle Taper: 40 CT
Tool Changer: 30 ATC
Cutting Feed rate: 1417"
Distance from Table to Spindle Nose: 5.1"– 23.2"
Distance from Column to Table Center: 8.5" – 26.4"
Max Tool Dia.: 3.1"
Max Tool Length: 11.8"
Tool Change Time: 1.2 Sec
Air Required: 80 psi, 4 scfm
Power: 25kva / 205-220v / 66FLA / 3-Phase
Dimensions: 168" x 95" x 100"
Weight: 16,500 LBS
Equipped With:
Fanuc Series 16i-M
Chip Conveyor
Coolant Thru Spindle
30 pocket tool changer
80 gallon coolant tank
Spindle Chiller
Chip Conveyor
Coolant Thru Spindle
30 pocket tool changer
80 gallon coolant tank
Spindle Chiller
Seller:
Brad (Machine Shop in USA)
