Seller Needs:
$15,000|
521
|
0
Pre-owned KITAMURA MyCenter HX400G 1999 Horizontal Machining Center. This Horizontal Machining Center has average cutting time and is equipped with a Fanuc Series 16i-M control. This CNC Machine is currently located in USA. This KITAMURA Horizontal Machining Center is available for a limited time. Get a quote today on this MyCenter HX400G before it's gone.
Seller Needs:
Payment:
Specs:
Manufacturer: Kitamura Machining Company LTD (Japan)
Model: MyCenter-HX400
Electrics: 480 Volt, 3 Phase, 60 Hz (stepdown transformer utilized)
Spindle Power: 20 HP
Hours:
......Power On: 32,015.9
......Cutting: 2,841.93
Features and Specifications:
...Series 16i-M CNC Controls
...Pallet Size: 15.7"
...2-Station Pallet Changer
...Travels:
......X-Axis: 28.93"
......Y-Axis: 24.01"
......Z-Axis: 24.01"
......Full 4th-Axis
...Spindle Speed (max.): 13,000 RPM
...Spindle Taper: Cat 40
...Max. Tool Diameter: 3.74"
...Max. Tool Weight: 22.046 lbs.
...Rapid Feedrates: 2,362 IPM
...ATC: 50 Slot, Twin Arm Changer
...Coolant Tank & Oil Skimmer
...Spindle Chiller
...Rigid Tapping
...Way Lube & Spindle Bearing Air Oiler
...Thru Spindle Coolant
...Scrap Conveyor
...Remote Pendant
...Transformer
...Tooling:
......23 Tool Holders
......Pull Studs
......(2) Pallets, Tombstones
...Manuals
Equipment Dimensions (approx.): 250" x 108" x 135"
Equipment Weight (approx.): 28,800 lbs.
The machine is a 2nd-owner unit; current owner purchased approximately 8 years ago. Fanuc batteries were replaced with more easily managed outer access battery packs (see pics). Machine goes through yearly maintenance program including coolant and oil changes; way covers get pulled and all chips removed. Way covers replaced and resealed within last 5 years.
When machine was used in production, unit always went through 1-hour spindle warm-up routine prior to machining. Machine comes with (2) pallets and (2) tombstones.
Buyer responsible for rigging out of shop and loading on transportation.
Model: MyCenter-HX400
Electrics: 480 Volt, 3 Phase, 60 Hz (stepdown transformer utilized)
Spindle Power: 20 HP
Hours:
......Power On: 32,015.9
......Cutting: 2,841.93
Features and Specifications:
...Series 16i-M CNC Controls
...Pallet Size: 15.7"
...2-Station Pallet Changer
...Travels:
......X-Axis: 28.93"
......Y-Axis: 24.01"
......Z-Axis: 24.01"
......Full 4th-Axis
...Spindle Speed (max.): 13,000 RPM
...Spindle Taper: Cat 40
...Max. Tool Diameter: 3.74"
...Max. Tool Weight: 22.046 lbs.
...Rapid Feedrates: 2,362 IPM
...ATC: 50 Slot, Twin Arm Changer
...Coolant Tank & Oil Skimmer
...Spindle Chiller
...Rigid Tapping
...Way Lube & Spindle Bearing Air Oiler
...Thru Spindle Coolant
...Scrap Conveyor
...Remote Pendant
...Transformer
...Tooling:
......23 Tool Holders
......Pull Studs
......(2) Pallets, Tombstones
...Manuals
Equipment Dimensions (approx.): 250" x 108" x 135"
Equipment Weight (approx.): 28,800 lbs.
The machine is a 2nd-owner unit; current owner purchased approximately 8 years ago. Fanuc batteries were replaced with more easily managed outer access battery packs (see pics). Machine goes through yearly maintenance program including coolant and oil changes; way covers get pulled and all chips removed. Way covers replaced and resealed within last 5 years.
When machine was used in production, unit always went through 1-hour spindle warm-up routine prior to machining. Machine comes with (2) pallets and (2) tombstones.
Buyer responsible for rigging out of shop and loading on transportation.
Options:
Fanuc Series 16i-M
Chip Conveyor
Coolant Thru Spindle
360,000 Full 4th
2-Station Pallet Changer
Transformer
Toolholders
Chip Conveyor
Coolant Thru Spindle
360,000 Full 4th
2-Station Pallet Changer
Transformer
Toolholders
Seller:
JerrS494
Location:
USA
Further Reading
