This 2008 MAKINO A61 Horizontal Machining Center comes equipped with a variety of options and upgrades designed for versatile functionality. Its features include a Chip Conveyor, Probe, and Coolant Thru Spindle. The machine b...Read More
Seller Needs:
Payment:
Call For Financing
Specs:
X Axis Travel: 28.76"
Y Axis Travel: 25.61"
Z Axis Travel: 28.76"
Spindle Speed: 14,000 RPM
Spindle Taper: CAT 40 CT
Spindle Motor: 30 HP
Rapid Rate Y Axis: 1,969 IPM
Rapid Rate X Axis: 1,969 IPM
Rapid Rate Z Axis: 1,969 IPM
Tool Changer: 40 ATC
Max Pallet Load: 1540 LBS
Max. Workpiece Size: 31.5" x 39.4"
Max. Tool Diameter: 6.7"/14.2"
Max. Tool Weight: 26.4 LBS
Pallet Size: 19.7" x 19.7"
Dimensions: 190" x 115" x 115"
Weight: 20,900 LBS
2008 Makino MMC2 Multi Layer 24 Pallet System
This is a MMC for A61 machines. We currently have 2 A61’s on this system. One 2008 unit is listed below. The other we are going to keep because it has an HSK spindle. Therefore a separate 2012 unit (listed below) will be taken off another MMC to swap for the HSK spindle machine.
2008 Makino A61
Has Renishaw MP700 probe and the software.
This machine is currently installed on the above MMC we are looking to sell.
2012 Makino A61NX
Doesn’t have a probe or the software.
This machine is on another MMC that we have on site but will be sold with the first 2 pieces of equipment.
We would need to sell the MMC and 2 machines as a complete package instead of separate.
Y Axis Travel: 25.61"
Z Axis Travel: 28.76"
Spindle Speed: 14,000 RPM
Spindle Taper: CAT 40 CT
Spindle Motor: 30 HP
Rapid Rate Y Axis: 1,969 IPM
Rapid Rate X Axis: 1,969 IPM
Rapid Rate Z Axis: 1,969 IPM
Tool Changer: 40 ATC
Max Pallet Load: 1540 LBS
Max. Workpiece Size: 31.5" x 39.4"
Max. Tool Diameter: 6.7"/14.2"
Max. Tool Weight: 26.4 LBS
Pallet Size: 19.7" x 19.7"
Dimensions: 190" x 115" x 115"
Weight: 20,900 LBS
2008 Makino MMC2 Multi Layer 24 Pallet System
This is a MMC for A61 machines. We currently have 2 A61’s on this system. One 2008 unit is listed below. The other we are going to keep because it has an HSK spindle. Therefore a separate 2012 unit (listed below) will be taken off another MMC to swap for the HSK spindle machine.
2008 Makino A61
Has Renishaw MP700 probe and the software.
This machine is currently installed on the above MMC we are looking to sell.
2012 Makino A61NX
Doesn’t have a probe or the software.
This machine is on another MMC that we have on site but will be sold with the first 2 pieces of equipment.
We would need to sell the MMC and 2 machines as a complete package instead of separate.
Options:
Chip Conveyor
Probe
Coolant Thru Spindle
360,000 Full 4th
Pallet Pool/FMS
Professional 5 Controls
MMC2 System 24 pallet pallet pool with two work stations, 12 pallets available
Module MMC
134 / 133 Position Tool Changer
Mayfran Concept 2000 Chip Conveyor
ChipBlaster 1000 PSI Through Spindle
Coolant Temperature Controller
Data Server
Buffer Mode for Data server
Air Dryer
Renishaw Auto Part Measuring
Renishaw Auto Tool Length Measurement
High Accuracy Package
Helical Interpolation
4200 ft / 2100 ft part program storage
1000 / 500 registered programs
200 / 200 tool offset pairs
Tool offset memory type C
300 additional work offsets
Probe
Coolant Thru Spindle
360,000 Full 4th
Pallet Pool/FMS
Professional 5 Controls
MMC2 System 24 pallet pallet pool with two work stations, 12 pallets available
Module MMC
134 / 133 Position Tool Changer
Mayfran Concept 2000 Chip Conveyor
ChipBlaster 1000 PSI Through Spindle
Coolant Temperature Controller
Data Server
Buffer Mode for Data server
Air Dryer
Renishaw Auto Part Measuring
Renishaw Auto Tool Length Measurement
High Accuracy Package
Helical Interpolation
4200 ft / 2100 ft part program storage
1000 / 500 registered programs
200 / 200 tool offset pairs
Tool offset memory type C
300 additional work offsets
Seller:
WadeT884
Location:
TX
Further Reading