Seller Needs:
$63,000|
813
|
0
This 2007 MAZAK QTN200-IIMSY is available for purchase, equipped with an array of options that enhance its functionality and versatility. Included in this offering are a chip conveyor, parts catcher, sub spindle, and Y axis c...Read More
Seller Needs:
Payment:
Specs:
Bar Capacity: 2"
Spindle Bore: 3.0"
Chuck Size Main: Collet
Subspindle: 6" Hyd
Spindle Speed: 5,000 RPM
Sub Spindle Speed: 6,000 RPM
Spindle Motor: 35 HP
Sub Spindle Motor: 15 HP
Spindle Nose: A2-6
X Axis Travel: 9.055"
Y-Axis Travel 4" (+/- 2.0")
Z Axis Travel: 22.63"
Rapid Rate Z Axis: 1,299 IPM
Turret Tools: 12 Station
Rapid Rate X Axis: 1,181 IPM
Rapid Traverse Rates: 1,181 IPM
Max Turning Dia: 14.75"
Max Turning Length: 21.27"
Max Swing: 26.5"
C1 Axis Spindle Rotation/C2 Axis Spindle Rotation .001 / .001 Degree
B-Axis Travel (Subspindle) 23.0"
Machine Dimensions 107" x 74" x 73"
Machine Weight 10,802 lbs.
Spindle Bore: 3.0"
Chuck Size Main: Collet
Subspindle: 6" Hyd
Spindle Speed: 5,000 RPM
Sub Spindle Speed: 6,000 RPM
Spindle Motor: 35 HP
Sub Spindle Motor: 15 HP
Spindle Nose: A2-6
X Axis Travel: 9.055"
Y-Axis Travel 4" (+/- 2.0")
Z Axis Travel: 22.63"
Rapid Rate Z Axis: 1,299 IPM
Turret Tools: 12 Station
Rapid Rate X Axis: 1,181 IPM
Rapid Traverse Rates: 1,181 IPM
Max Turning Dia: 14.75"
Max Turning Length: 21.27"
Max Swing: 26.5"
C1 Axis Spindle Rotation/C2 Axis Spindle Rotation .001 / .001 Degree
B-Axis Travel (Subspindle) 23.0"
Machine Dimensions 107" x 74" x 73"
Machine Weight 10,802 lbs.
Options:
Mazatrol Matrix Nexus
Chip Conveyor
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
Subspindle with .001 Degree Index
Full C Axis Spindle Rotation
Live Milling / Drilling Capability
6" 3 Jaw Hydraulic Chuck on Subspindle
Automatic Tool Eye
Mist Collector
Mill Spindle Synchronous Tapping
RS 232 Port Interface
3.5" Floppy Disk Drive Interface
Chuck Air Blast - Second Spindle
EIA/ISO Input Function for G Code Programming
Multi Tap Transformer
Coolant System with Tank & Pump
Chip Conveyor
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
Subspindle with .001 Degree Index
Full C Axis Spindle Rotation
Live Milling / Drilling Capability
6" 3 Jaw Hydraulic Chuck on Subspindle
Automatic Tool Eye
Mist Collector
Mill Spindle Synchronous Tapping
RS 232 Port Interface
3.5" Floppy Disk Drive Interface
Chuck Air Blast - Second Spindle
EIA/ISO Input Function for G Code Programming
Multi Tap Transformer
Coolant System with Tank & Pump
Seller:
MarkP815
Location:
USA
Further Reading
