
Machine Overview
This 2009 MAZAK QTN350MSY is a versatile and productive machine loaded with essential features that cater to rigorous machining needs. It comes equipped with key options including a Chip Conveyor, Tool Presetter, Bar Feeder, Parts Catcher, and a Sub Spindle, making it a comprehensive solution for diverse cutting tasks.
The machine's specifications highlight its capabilities, featuring a swing over bed of 749.3 mm and a maximum cutting diameter of 374.65 mm. The maximum cutting length extends to 650.24 mm, supported by X-axis travel of 298.45 mm and Y-axis travel of 4" (+/- 2"). The Z-axis travel is 666.75 mm, complemented by a chuck size of 381 mm and a bar capacity of 101.6 mm.
The spindle's specifications include a bore of 111.76 mm and a nose of A2-11, powered by a 22.4 kW motor that achieves speeds up to 3,300 RPM. The sub spindle enhances functionality with a 254 mm chuck size, A2-8 nose, 14.9 kW motor, and a maximum speed of 4,000 RPM.
This machine is further enhanced with a Turret Capacity holding 12 tools, live milling with speeds up to 4,000 RPM, and the advanced MAZATROL MATRIX NEXUS CONTROL (VOICE ADVISER). It also includes a LNS Quick Load Servo S3 Magazine Bar Feeder for efficient loading and a HAinbuch collet chuck on the main spindle.
The MAZAK Superflow T8-1000 delivers a high-pressure coolant system rated at 1,000 PSI, ensuring smooth operation. Additionally, the package features a 15", 3-jaw ATS hydraulic chuck and a 10", 3-jaw Kitagawa hydraulic chuck for the sub spindle, supporting varied clamping needs.
For additional convenience, this machine includes a full set of live tool holders and other crucial components such as a parts conveyor. As of April 2025, the machine records 9,616 hours of cutting time, mostly dealing with aluminum and carbon steel.
The machine is intact and currently under power in the plant, ready for immediate inspection and purchase. Please note that the mist collector shown in photos is not included. All tool holders present in the turret will accompany the machine, though inserts are not included.
For a full list of MAZATROL control options and further details, please refer to the accompanying photos. The full replacement cost as equipped is approximately $350,000.
Machine Comps
