Used MAZAK VTC300C Vertical Machining Center
Pre-owned 2013 MAZAK VTC300C Vertical Machining Center for sale in Montana. This machine boasts an impressive list of options, including a TSC, 213 HPCP, Mazak MR-160 4th Axis Rotary Table with 6" Kitagawa chuck, OMP Probing system, Rigid Tapping, and Cylindrical Interpolation. It also comes with a new 12,000rpm spindle and 30hp motor installed by Mazak in mid-April '23, with less than 100 hours since installation. In addition to the already impressive list of options, this machine comes with a great deal of tooling. The seller is including 6 HDL6 dual station high density kurt vises and 1 parts vise, along with a ton of CAT40 toolholders and pull studs, including Sandvik corochuck hydraulic 930, Regofix and Sandvik ER 32 collet chucks and collets, sidelock holders, facemill holders, parlec eros holders, insert drills, and more. With this purchase, you will have everything you need to get started. This machine, with all of its options and upgrades, would cost over $392,000 MSRP as equipped today, not including the tooling and vices! The machine should be available in the beginning to middle of June. Why is the seller parting with this amazing piece of machinery? They are switching over to a new system and upgrading their equipment. This means that you have the chance to take advantage of their need to move on from this machine, and get yourself a great deal on a Mazak VTC300C Vertical Machining Center. To summarize, this 2013 MAZAK VTC300C Vertical Machining Center is loaded with options, has been meticulously maintained, and comes with a ton of tooling and accessories. With the new 12,000rpm spindle and 30hp motor installed by Mazak, you can be sure that this machine will be a workhorse for years to come, instead of waiting for years to get a new one for hundreds of thousands more. Don't miss your chance to own this impressive piece of machinery.
Here's what the seller told us:
The machine is good condition and runs without issue. In the last month Mazak has installed a new 12k RPM Spindle and 30HP Motor. He has also installed a new pendant as well as replaced the valve for the High Pressure Coolant Pump and the mixer valve. Approximately $50,000 in maintenance and upgrades has been completed in the last 30 days. The seller is also including all the tooling he has for the machine as well was CAT40 Tool Holders, 6 Kurt Vices and much more (see photos).
Y Axis Travel: 30"
Z Axis Travel: 26"
Rapid Rate X Axis: 1,181 IPM
Rapid Rate Y Axis: 1,181 IPM
Rapid Rate Z Axis: 787 IPM
Max Table Load: 3,300 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: #40 CT
Tool Changer: 24 ATC
Table Size: 79" x 30"
Dimensions: 170" x 133" x 112"
Weight: 24,250 LBS
Coolant Thru Spindle
4th Axis Rotary Table
Mazak MR-160 RAM01 NC Rotary Table package
6.5” Manual chuck for MR-160 Rotary axis
Renishaw Dual probing kit,OMP60/OTS-AA
Operating Condition lights (3 colors)
Auto Pecking with Load Detection
Mazak Tapping/Boring Tornado, (EIA/ISO), (G130)
Full Length Inverter chip conveyor, Right side discharge
High Pressure Coolant, Thru spindle, 3 HP, 213 psi
6 HDL6 dual station high density kurt vises and 1 parts vise
Equipped with Shop Floor Automation System
PCMCIA Card Network Connection
Renishaw EIA Inspection Plus
Vices Not Included