Used MITSUBISHI MV2400S EDM
Pre-owned MITSUBISHI MV2400S 2014 EDM. This EDM has average cutting time and is equipped with a Mitsubishi control. This CNC Machine is currently located in USA. This MITSUBISHI EDM is available for a limited time. Get a quote today on this MV2400S before it's gone.
Y Axis Travel: 15.7"
Z Axis Travel: 16.7"
Max. Workpiece Dimensions: 41.3" x 32.3" x 12"
Workpiece Weight: 3,300lbs
Table Dimensions (3-Sided): 33" x 22"
Machining Range: 23.6" x 15.7" x 12.2"
U/V Travel: ±3.0 x ±3.0
Taper Angle: 15° @ 10.25?
Table Rapid Feed (in / min): 51.2
Wire Diameter (in): .004-.012 (.010 Std)
Min Wire Thread Start Hole (in): .020
Max Workpiece AT Height (in): 12.2
Wire Tension (g): 50 ~ 2500
Wire Spooling Speed (in / sec): 0 ~ 11.8
Filter System: Paper Cartridge (2x)
Filter Precision: 5 Micron
Ion-Exchange Resin: 1 ft³. (6.4 gal dry)
Filter Tank Capacity (gallons): 227
Dielectric System Dim (in): 34.4 x 90.5 x 61.7
Dielectric System Weight: 880lbs
Dimensions: 105.8" x 119.3" x 84.6"
Weight: 7,716
Type: CNC Wire