This MIYANO BNE51S is a versatile CNC lathe that includes a variety of options to suit different machining needs. It is equipped with a Chip Conveyor, Bar Feeder, Parts Catcher, Live Tooling, and Sub Spindle.
The machine is ...Read More
Seller Needs:
Payment:
Specs:
Miyano CNC Lathe Model BNE-51S
Faunc Series 18-T CNC Controls
2" Turning Diameter 20 HP Spindle Motor 4,000Max RPM 2 Turrets Live Tooling Sub Spindle Chip Conveyor Shaft Attachment Parts Catcher Machine was running when disconnected Machine comes with: IEMCA Bar Feeder Model Boss 542 CNC/37 3/16" - 1-5/8" Bar Size Capacity 12' Bar Length Capacity
Sold As-Is. Can assist with loading onto flatbed/ stepdeck trailer. Local pick up only
1. Sub spindle moving freely, but there's an issue with the motor sensor. Also on the sub spindle, the fan needs to be replaced (not running)
2. On the main spindle, the fan would also need to be replaced (not running).
Machine was looked over by a tech and these were his findings
Faunc Series 18-T CNC Controls
2" Turning Diameter 20 HP Spindle Motor 4,000Max RPM 2 Turrets Live Tooling Sub Spindle Chip Conveyor Shaft Attachment Parts Catcher Machine was running when disconnected Machine comes with: IEMCA Bar Feeder Model Boss 542 CNC/37 3/16" - 1-5/8" Bar Size Capacity 12' Bar Length Capacity
Sold As-Is. Can assist with loading onto flatbed/ stepdeck trailer. Local pick up only
1. Sub spindle moving freely, but there's an issue with the motor sensor. Also on the sub spindle, the fan needs to be replaced (not running)
2. On the main spindle, the fan would also need to be replaced (not running).
Machine was looked over by a tech and these were his findings
Options:
Chip Conveyor
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Seller:
MarkP815
Location:
USA
Further Reading