Used MORI SEIKI NH6300DCG Horizontal Machining Center
Pre-owned MORI SEIKI NH6300DCG 2007 Horizontal Machining Center for only $99,500. This Horizontal Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in IA. This MORI SEIKI Horizontal Machining Center is the only one in stock and available for a limited time. Get a quote today on this NH6300DCG before it's gone.
Specifications:
X Axis Travel: 41.34"
Y Axis Travel: 35.43"
Z Axis Travel: 38.58"
Rapid Rate X Axis: 164 IPM
Rapid Rate Y Axis: 164 IPM
Rapid Rate Z Axis: 164 IPM
Pallet Size: 24.8" X 24.8""
Max Pallet Load: 3,307 LBS
Spindle Speed: 8,000 RPM
Spindle Motor: 49.6 HP
Spindle Taper: 50 CT
Tool Changer: 60 ATC
Torque (100% power-on time) 516.3 ft./lbs.
Max. workpiece height 51.2 in
Dimensions: 134.4 in. x 132.7 x 34.5 in.
Weight:
Y Axis Travel: 35.43"
Z Axis Travel: 38.58"
Rapid Rate X Axis: 164 IPM
Rapid Rate Y Axis: 164 IPM
Rapid Rate Z Axis: 164 IPM
Pallet Size: 24.8" X 24.8""
Max Pallet Load: 3,307 LBS
Spindle Speed: 8,000 RPM
Spindle Motor: 49.6 HP
Spindle Taper: 50 CT
Tool Changer: 60 ATC
Torque (100% power-on time) 516.3 ft./lbs.
Max. workpiece height 51.2 in
Dimensions: 134.4 in. x 132.7 x 34.5 in.
Weight:
Equipped With:
Chip Conveyor
Probe
Coolant Thru Spindle
360,000 Full 4th
Cool Jet High Pressure Coolant System
CAT50 Spindle with DIN B Coolant
Cool Jet Coolant Chiller
Rigid Tapping
M&H Radio Probe Length Tool
Probe
Coolant Thru Spindle
360,000 Full 4th
Cool Jet High Pressure Coolant System
CAT50 Spindle with DIN B Coolant
Cool Jet Coolant Chiller
Rigid Tapping
M&H Radio Probe Length Tool
Seller:
Charley (Machine Shop in USA)
Answers
what did it cost when it was new?
450000
any options?
Chip Conveyor Cool
Jet High Pressure Coolant System
CAT 50 spindle with DIN B coolant
high pressure unit from MHP and a Cool Jet coolant Chiller
8,000 rpm high torque spindle
full 4th axis
60 tools
M&H radio probe tool length probe
rigid tapping
TSC
any tooling included?
will sell separtely
what are the hours?
RUN: 16,492
CUTTING: 12,268
POWER: 30,844
when do you need it out by?
ASAP
why are you thinking of selling it?
Entire facility closed
Answers
what did it cost when it was new?
450000
any options?
Chip Conveyor Cool
Jet High Pressure Coolant System
CAT 50 spindle with DIN B coolant
high pressure unit from MHP and a Cool Jet coolant Chiller
8,000 rpm high torque spindle
full 4th axis
60 tools
M&H radio probe tool length probe
rigid tapping
TSC
any tooling included?
will sell separtely
what are the hours?
RUN: 16,492
CUTTING: 12,268
POWER: 30,844
when do you need it out by?
ASAP
why are you thinking of selling it?
Entire facility closed
