2010 MORI SEIKI NT1000S

This 2010 MORI SEIKI NT1000S comes equipped with a collection of options for your convenience. These include a Chip Conveyor, Live Tooling, a Sub Spindle, a Y Axis, and a 5 Axis. It also contains a MORI SEIKI NT-1000SZ MILL/TURN CENTER, a CHIP CONVEYOR, a CHIP BLASTER SYSTEM, and a FULL B-AXIS, which further enhances its capabilities and application range.

The machine boasts numerous specifications, providing a diverse range of functionalities to cater to assorted needs. A maximum swing of workpiece it can handle is 14.5", and it has a swing over cross slide of 14.5", while the turret can take a swing of 11.8".

As for the turning length, the machine can offer a maximum of 16.6". It also includes a X Axis Travel of 15, and a Y Axis Travel of + / 4.1". The Z Axis Travel is 18.1 + 6.1. Other attractive features are its X Axis Travel: TRT 2 6.1, Z Axis Travel: TRT 2 of 24 and a C Axis Travel: MAIN / SUB .0001 DEG.

The machine also has a B Axis minimum index angle/Index range of -120 +120 Degree, accompanied by a B Axis Spindle Speed of HSC 20,000 RPM. It carries a 12 HP tool spindle and possesses 38 ATC tool types for the tool spindle. The spindle nose follows the NO 1, NO 2 A2-5 / G6 flat nose pattern. The hole through spindle is NO 1, NO 2 of 2.4" / 2.2", and the bar work capacity is NO. 1, NO 2 of 2.0/1.5".

The machine uses a 15 HP main spindle motor and a 10 HP sub spindle motor. This machine also includes a Spindle Speed of NO 1, NO 2 6000 / 1000 RPM and a Rapid Traverse Rate of X, Y, Z, A 945, 945, 629, 300 IPM. Its turret configuration is 10, and the time it takes to index the turret is .26 sec.

This machine is heavy, weighing around 19,690 LBS, ensuring its stability while operating. In terms of its additional features, it has MSX-711 IV CNC CONTROL, CHIP CONVEYOR, CHIPBLASTER F-75MSF, OMP 400 PROBE SYSTEM, .0001 DEG FULL B-AXIS and an AIR BLAST which further enhances its capabilities.