Used MULTICAM 1204R Router
Specifications:
25mm linear bearing profile rails
Z-axis clearance: 4.5”
Cut speed: 550 IPM
Rapid traverse: 850 IPM
Repeatability: +/- 0.001”
Drive system X and Y-axis: rack and pinion
Drive system Z-axis: lead screw
ENROUTE 4 is the Software
OpTPLEX 780 Computer
Z-axis clearance: 4.5”
Cut speed: 550 IPM
Rapid traverse: 850 IPM
Repeatability: +/- 0.001”
Drive system X and Y-axis: rack and pinion
Drive system Z-axis: lead screw
ENROUTE 4 is the Software
OpTPLEX 780 Computer
Equipped With:
MultiCam easy control
Dust Collector
Vacuum System
Hold Down
Dust Collector
Vacuum System
Hold Down
