Seller Needs:
$10,500|
5019
|
0
Pre-owned OKUMA & HOWA MILLAC 45V 1994 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Michigan. This OKUMA & HOWA Vertical Machining Center is available for a limited time. Get a quote today on this MILLAC 45V before it's gone.
Seller Needs:
Payment:
Specs:
X Axis Travel: 37"
Y Axis Travel: 18"
Z Axis Travel: 20"
Rapid Rate X Axis: 787 IPM
Rapid Rate Y Axis: 787 IPM
Rapid Rate Z Axis: 787 IPM
Table Size: 51" X 18"
Max Table Load: 550 LBS
Spindle Motor: 15 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Dimensions: 101" x 101" x 109"
Weight: 11,500 LBS
Y Axis Travel: 18"
Z Axis Travel: 20"
Rapid Rate X Axis: 787 IPM
Rapid Rate Y Axis: 787 IPM
Rapid Rate Z Axis: 787 IPM
Table Size: 51" X 18"
Max Table Load: 550 LBS
Spindle Motor: 15 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Dimensions: 101" x 101" x 109"
Weight: 11,500 LBS
Options:
(one), Used, OKUMA HOWA 3- AXIS CNC VERTICAL MACHINING CENTER MODEL MILLAC 45V Serial number: 03134 Year: unknown. Estimated early 1990’s Video Demo: https://www.youtube.com/watch?v=DIIoH6gzzYESPECIFICATIONS: Table size: 51” x 17.9” X axis travel: 36.22” Y axis travel: 17;7” Z axis travel: 19.69” Rapid traverse rate: 629.92 IPM Cutting rate: Maximum 196.68 IPM Spindle type: CAT 40 Spindle speed range: 60 – 10,000 RPM Spindle motor: Two speeds – 11 KW / 7.5 KW Machine height: 9’ Floor space required: 10.7’ x 10.2’ Machine weight: 15,620 lbs Auto tool changer: 24 positions COMPLETE WITH: Fanuc A/C “Red Cap” motors Fanuc OM CNC Full Enclosure Chip Auger
Seller:
TedB531
Location:
MI
Further Reading
