Seller Needs:
$17,500|
4978
|
10
Up for considerations is a 2018 TORMACH 1100M Vertical Machining Center that has been lightly used and enthusiastically maintained. Originally obtained for personal pursuits, this decidedly capable machine has clocked less th...Read More
Seller Needs:
Payment:
Rigging:
$1,200
Specs:
Y Axis Travel: 18"
X Axis Travel: 11"
Z Axis Travel: 16.25"
Spindle Motor: 2 HP
Spindle Speed: 7,500 RPM
Spindle Taper: R8 CT
Rapid Rate X Axis: 110 IPM
Rapid Rate Y Axis: 110 IPM
Rapid Rate Z Axis: 90 IPM
Primary Power Required: Single-Phase 230 Vac, 50/60Hz, 20A breaker
Table Slots: 5/8 in. - Three slots (15.9 mm - Three slots)
Spindle Nose to Table Max. Clearance: 18 in. (457 mm)
Spindle Centerline to Machine Column: 11 in. (279 mm)
Typical System Footprint: 69 in. × 56.5 in. (1753 mm x 1435 mm)
Overall System Height: 96 in. (2438 mm)
Typical System Weight: 1600 lb (726 kg)
Maximum Weight on Table: 500 lbs. (227 kg)
X Axis Travel: 11"
Z Axis Travel: 16.25"
Spindle Motor: 2 HP
Spindle Speed: 7,500 RPM
Spindle Taper: R8 CT
Rapid Rate X Axis: 110 IPM
Rapid Rate Y Axis: 110 IPM
Rapid Rate Z Axis: 90 IPM
Primary Power Required: Single-Phase 230 Vac, 50/60Hz, 20A breaker
Table Slots: 5/8 in. - Three slots (15.9 mm - Three slots)
Spindle Nose to Table Max. Clearance: 18 in. (457 mm)
Spindle Centerline to Machine Column: 11 in. (279 mm)
Typical System Footprint: 69 in. × 56.5 in. (1753 mm x 1435 mm)
Overall System Height: 96 in. (2438 mm)
Typical System Weight: 1600 lb (726 kg)
Maximum Weight on Table: 500 lbs. (227 kg)
Seller:
BriaG829
Location:
FL
Further Reading
