Seller Needs:
$21,000|
1311
|
4
Pre-owned TORMACH 1100M 2020 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a Path pilot control. This CNC Machine is currently located in USA. This TORMACH Vertical Machining Center is available for a limited time. Get a quote today on this 1100M before it's gone.
Seller Needs:
Payment:
Specs:
X Axis Travel: 11"
Y Axis Travel: 18"
Z Axis Travel: 16.25"
Rapid Rate X Axis: 110 IPM
Rapid Rate Y Axis: 110 IPM
Rapid Rate Z Axis: 90 IPM
Table Size:
Max Table Load: LBS
Spindle Motor: 2 HP
Spindle Speed: 7,500 RPM
Spindle Taper: R8
Tool Changer: ATC
Primary Power Required: Single-Phase 230 Vac, 50/60Hz, 20A breaker
Table Slots: 5/8 in. - Three slots (15.9 mm - Three slots)
Spindle Nose to Table Max. Clearance: 18 in. (457 mm)
Spindle Centerline to Machine Column: 11 in. (279 mm)
Typical System Footprint: 69 in. × 56.5 in. (1753 mm x 1435 mm)
Overall System Height: 96 in. (2438 mm)
Typical System Weight: 1600 lb (726 kg)
Maximum Weight on Table: 500 lbs. (227 kg)
Dimensions:
Weight: LBS
Y Axis Travel: 18"
Z Axis Travel: 16.25"
Rapid Rate X Axis: 110 IPM
Rapid Rate Y Axis: 110 IPM
Rapid Rate Z Axis: 90 IPM
Table Size:
Max Table Load: LBS
Spindle Motor: 2 HP
Spindle Speed: 7,500 RPM
Spindle Taper: R8
Tool Changer: ATC
Primary Power Required: Single-Phase 230 Vac, 50/60Hz, 20A breaker
Table Slots: 5/8 in. - Three slots (15.9 mm - Three slots)
Spindle Nose to Table Max. Clearance: 18 in. (457 mm)
Spindle Centerline to Machine Column: 11 in. (279 mm)
Typical System Footprint: 69 in. × 56.5 in. (1753 mm x 1435 mm)
Overall System Height: 96 in. (2438 mm)
Typical System Weight: 1600 lb (726 kg)
Maximum Weight on Table: 500 lbs. (227 kg)
Dimensions:
Weight: LBS
Options:
Path pilot
Probe
Programmable Coolant
ATC
Flood Coolant
Probe
Programmable Coolant
ATC
Flood Coolant
Seller:
DaviB777
Location:
USA
Further Reading
