Seller Needs:
$44,500|
582
|
0
Pre-owned TRAK TMC7 2021 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a ProtoTRAK/RMX control. This CNC Machine is currently located in USA. This TRAK Vertical Machining Center is available for a limited time. Get a quote today on this TMC7 before it's gone.
Seller Needs:
Payment:
Specs:
X Axis Travel: 30"
Y Axis Travel: 20"
Z Axis Travel: 20"
Rapid Rate X Axis: 1,000 IPM
Rapid Rate Y Axis: 1,000 IPM
Rapid Rate Z Axis: 1,000 IPM
Table Size: 36" x 20"
Max Table Load: 1,000 LBS
Spindle Motor: 15 HP
Spindle Speed: 8,000 RPM
Spindle Taper: 40 CAT
Tool Changer: 16 ATC
Coolant System: 56 Gallons
Electronic Handwheels
Kaukan C&H-3AF Cabinet Cooler
4th-Axis Capable (requires card)
Rigid Tapping
Air & Coolant Blast
Double Auger
Dimensions: 97" x 108" x 97" Tall
Weight: 8,400 LBS
Present owner purchased machine new in 2020; is selling because has purchased a larger capacity machine. Machine has basic features except for handwheels to move table in X, Y and the quill - demonstrated on imbedded video. Machine is 4th-Axis capable; requires card. Owner estimates hours are between 5,000 and 6,000.
Unit is in excellent condition; well maintained. Can be put under power and tested for serious inquiry. Please call to schedule inspection.
SELLER CAN LOAD FOR YOU!
Y Axis Travel: 20"
Z Axis Travel: 20"
Rapid Rate X Axis: 1,000 IPM
Rapid Rate Y Axis: 1,000 IPM
Rapid Rate Z Axis: 1,000 IPM
Table Size: 36" x 20"
Max Table Load: 1,000 LBS
Spindle Motor: 15 HP
Spindle Speed: 8,000 RPM
Spindle Taper: 40 CAT
Tool Changer: 16 ATC
Coolant System: 56 Gallons
Electronic Handwheels
Kaukan C&H-3AF Cabinet Cooler
4th-Axis Capable (requires card)
Rigid Tapping
Air & Coolant Blast
Double Auger
Dimensions: 97" x 108" x 97" Tall
Weight: 8,400 LBS
Present owner purchased machine new in 2020; is selling because has purchased a larger capacity machine. Machine has basic features except for handwheels to move table in X, Y and the quill - demonstrated on imbedded video. Machine is 4th-Axis capable; requires card. Owner estimates hours are between 5,000 and 6,000.
Unit is in excellent condition; well maintained. Can be put under power and tested for serious inquiry. Please call to schedule inspection.
SELLER CAN LOAD FOR YOU!
Options:
ProtoTRAK/RMX
Pre-Wired for 4th Axis
Kaukan Cabinet Heat Exchanger
Rigid Tapping
Electronic Handwheels
Air & Coolant Blast
Double Auger
Pre-Wired for 4th Axis
Kaukan Cabinet Heat Exchanger
Rigid Tapping
Electronic Handwheels
Air & Coolant Blast
Double Auger
Seller:
JerrS494
Location:
USA
Further Reading
