Used WENZEL XORBIT Inspection

Pre-owned WENZEL XORBIT 2012 Inspection. This Inspection has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This WENZEL Inspection is available for a limited time. Get a quote today on this XORBIT before it's gone.

Measurement Ranges, Weights

X-Axis Measurement Range: 500mm
Y-Axis Measurement Range: 700mm or 1000mm (Additional Y ranges available upon request)
Z-Axis Measurement Range: 500mm
Useable Table Surface: 800mm x 1500mm
Machine Weight: 1250 kg or 1450 kg
Permissible Part Weight: 300 kg
General Requirements

Electric: Single-phase AC, 1 P+N+PE, 115/230 V ± 10 %, 50/60 Hz, max. 1000 VA, ace. to EN 60204/1
Compressed Air: Supply pressure 6-10 bar, pre-filtered, quality according to ISO 8573-1 : Class 4 or better
Air Consumption: 70 NI/min
Measuring Accuracy

Measurement System: Photoelectric scale system, Optical division 20 µm
Resolution: 0.1 µm
Probing Uncertainty (TP20 Head): 2.6 µm
Probing Uncertainty (TP200 Head): 2.2 µm
Probing Uncertainty (SP25 Head): 2.0 µm
Volumetric Length Measuring Uncertainty (TP20 Head): 2.6 µm + L/300
Volumetric Length Measuring Uncertainty (TP200 Head): 2.2 µm + L/300
Volumetric Length Measuring Uncertainty (SP25 Head): 2.0 µm + L/300
Volumetric Scanning Probing Uncertainty (SP25 Head): 2.5 µm
Total Measuring Time for THP: 72 seconds
Operating Environment

Operating Temperature: 15-30ºC
Temperature Range for MPEE: 18-22ºC
Relative Humidity: 40-70%

Joystick Operation: 0-20 mm/s (Creep Mode), 0-100 (Normal)
CNC-Mode Vmax: 300 mm/s (Axial), 520 mm/s (Volumetric)
CNC-Mode Amax: 1200 mm/s2 (Axis-Related), 2000 mm/s2 (Volumetric)
Overall Dimensions

Width: 1180mm
Length: 1600mm or 1950mm
Height: 2505 mm
Software is Open DMIS-5
Gary (Machine Shop in MO)