Used DOOSAN PUMA 480L CNC Lathe
Pre-owned DOOSAN PUMA 480L 2010 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Texas. This DOOSAN CNC Lathe is available for a limited time. Get a quote today on this PUMA 480L before it's gone.
Specs:
Bar Capacity: 6.55"
Chuck Size: 24"
Spindle Speed: 1,500 RPM
Spindle Motor: 60 HP
X Axis Travel: 14.3"
Z Axis Travel: 84.8"
Rapid Rate Z Axis: 710 IPM
Turret Tools: 12 Station
Rapid Rate X Axis: 630 IPM
Max Turning Dia: 35.4"
Max Turning Length: 82.6"
Max Swing: 35.4"
Powerful 45 kW (60 hp) high-torque spindle drive
Spindle Bore 7.1"
Spindle Nose A1-15
High speed 1,500 rpm Spindle
Programmable high / low chucking pressure
Fast .25 second turret indexing
One-piece 45 degree torque-tube slant bed
Isolated 2-speed gearbox
Solid box way construction
Fluoroplastic anti-friction mating way surface
Double pretensioned X and Z axis ball screws with torque limiter ball screw protection
Fast 18 m/min (710 ipm) Z axis rapid traverse
Up to 26,878 N (6,042 lb) of Z axis thrust
Large 650 mm (25.6") maximum turning diameter
2,975 ft-lb of spindle torque
4.5 bar (65 psi) coolant system
Dimensions: 249" x 87" x 86"
Weight: 25,500 LBS
Chuck Size: 24"
Spindle Speed: 1,500 RPM
Spindle Motor: 60 HP
X Axis Travel: 14.3"
Z Axis Travel: 84.8"
Rapid Rate Z Axis: 710 IPM
Turret Tools: 12 Station
Rapid Rate X Axis: 630 IPM
Max Turning Dia: 35.4"
Max Turning Length: 82.6"
Max Swing: 35.4"
Powerful 45 kW (60 hp) high-torque spindle drive
Spindle Bore 7.1"
Spindle Nose A1-15
High speed 1,500 rpm Spindle
Programmable high / low chucking pressure
Fast .25 second turret indexing
One-piece 45 degree torque-tube slant bed
Isolated 2-speed gearbox
Solid box way construction
Fluoroplastic anti-friction mating way surface
Double pretensioned X and Z axis ball screws with torque limiter ball screw protection
Fast 18 m/min (710 ipm) Z axis rapid traverse
Up to 26,878 N (6,042 lb) of Z axis thrust
Large 650 mm (25.6") maximum turning diameter
2,975 ft-lb of spindle torque
4.5 bar (65 psi) coolant system
Dimensions: 249" x 87" x 86"
Weight: 25,500 LBS
Options:
Fanuc 32i CNC Control
Chip Conveyor
Tailstock
Chip Conveyor
Tailstock
Owner:
Heath (Machine Shop in Fl)
