Pre-owned EDGE TECHNOLOGIES PATRIOT 338 2012 Handling for only $14,900. This Handling has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in PA. This EDGE TECHNOLOGIES Handling is the only one in stock and available for a limited time. Get a quote today on this PATRIOT 338 before it's gone.

Bar diameter capacity-no bar preparation: 3 mm to 35.0 mm (.118” to 1.377”)
Bar diameter capacity-with bar preparation: 3 mm to 38 mm (.118” to 1.500”)
Maximum bar length: 3800 mm (12 feet 5 inches)
Minimum bar length: 1000 mm (39.400”)
Maximum remnant length: 406 mm (16”)
Magazine rack capacity: 12”
Bar loading cycle time: 30 seconds for 12-foot bar
Material straightness specification: .007” TIR/foot of material (V blocks, 3 points equidistant)
Feed force (pusher torque): max 450 N, adjustable
Forward feed rate: 750 inches/minute max, adjustable
Return feed rate: 1000 inches/minute max, adjustable
Power consumption: 1.5 kW – (2 kVA)
Operating voltage: 230V/60Hz 3-phase
Control voltage: 24V DC
Oil capacity: 57 liters (15 gallons)
Oil viscosity: ISO 100 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 8 liters per loading cycle
Machine weight: 2,500 lbs
Equipped With:
12 Foot Length
Steve (Machine Shop in USA)