Seller Needs:
$53,000|
5
|
0
Pre-owned ERMAK CNCAP 12x176 2008 Press Brake. This Press Brake has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Oregon. This ERMAK Press Brake is available for a limited t...Read More
Seller Needs:
Payment:
Specs:
Features and Specifications:
Capacity: 176 US Tons
CNC Controls: Delem DA-66W
4-Axis CNC
Remote Foot Pedal Control
Between Columns: 128"
Bending Length: 144"
Main Motor: 20 HP
Throat: 15.7"
Ram Travel: 7.9"
Back Gauge: 40" Travel
Safety Distance: 59"
Approach Speed: 3.94 IPS
CNC Crowning
Wila Hydraulic Upper Clamping System
Electrics: 220-440 Volt, 3 Phase, 60 Cycle, IP Rating 54
Dimensions: 193" x 85" x 114"
Weight: 26,460
Machine was purchased as part of a package deal by the present owner when he purchased a laser table in November 2022. The previous owner was a fabricating company in OR. The brake was under power when purchased by the present owner; he observed the ram actuating in the vertical axis but did not bend any parts. Consequently, fluids were removed to facilitate shipping to its current location in WA
Electrician reconnected the unit at owner's shop. The machine has not been utilized for production since that time. Owner has no reason to believe the unit does not work as it should. Machine is available for inspection. Unit does not have hydraulic fluid; however, controls can be turned on and CNC functions tested. If potential buyer wants to refill with hydraulic fluid at their expense to fully test machine, that is acceptable.
Equipment is available for inspection.
Buyer responsible for loading expenses onto their transportation.
Buyer responsible for freight logistics and expenses.
Capacity: 176 US Tons
CNC Controls: Delem DA-66W
4-Axis CNC
Remote Foot Pedal Control
Between Columns: 128"
Bending Length: 144"
Main Motor: 20 HP
Throat: 15.7"
Ram Travel: 7.9"
Back Gauge: 40" Travel
Safety Distance: 59"
Approach Speed: 3.94 IPS
CNC Crowning
Wila Hydraulic Upper Clamping System
Electrics: 220-440 Volt, 3 Phase, 60 Cycle, IP Rating 54
Dimensions: 193" x 85" x 114"
Weight: 26,460
Machine was purchased as part of a package deal by the present owner when he purchased a laser table in November 2022. The previous owner was a fabricating company in OR. The brake was under power when purchased by the present owner; he observed the ram actuating in the vertical axis but did not bend any parts. Consequently, fluids were removed to facilitate shipping to its current location in WA
Electrician reconnected the unit at owner's shop. The machine has not been utilized for production since that time. Owner has no reason to believe the unit does not work as it should. Machine is available for inspection. Unit does not have hydraulic fluid; however, controls can be turned on and CNC functions tested. If potential buyer wants to refill with hydraulic fluid at their expense to fully test machine, that is acceptable.
Equipment is available for inspection.
Buyer responsible for loading expenses onto their transportation.
Buyer responsible for freight logistics and expenses.
Seller:
JerrS494
Location:
OR
Further Reading
