Used GANESH 5X8 Vertical Machining Center

Pre-owned GANESH 5X8 2017 Vertical Machining Center for only $59,500 $52,500. This Vertical Machining Center has average cutting time and is equipped with a Mitsubishi Control control. This CNC Machine is currently located in CA. This GANESH Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this 5X8 before it's gone.

X Axis Travel: 12.6"
Y Axis Travel: 17.7"
Z Axis Travel: 14.9"
Rapid Rate X Axis: 1,417 IPM
Rapid Rate Y Axis: 1,417 IPM
Rapid Rate Z Axis: 944 IPM
Max Table Load: 165 LBS
Spindle Motor: 20 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Spindle Nose to Rotary Table Surface 2.11” - 15.62” 60 – 375mm
Spindle Center to Z-axis way covers 17.71” 450mm (throat dimension)
Platter Diameter Ø 8.34” Ø 210mm
Center Bore Diameter Ø 40 H7
T-slot width / Number 12 H7 / 4, Hardened & ground table & T-slots
Guide block width 18mm
Maximum Work table Load 165 lbs 75kgs for rated accuracy
Maximum Part Swing Ø12.5”
Spindle Torque 50 ft-lb @ 1,500 rpm
Tool Type CAT #40 Taper, BT #40 optional
Spindle Taper Material / Hardness SCM415 / HRC 58-62
Retention System / Holding Capability Bellville Spring Stack 1650-1760 lbs
Spindle Runout ? 0.000040” T.I.R
Spindle Bearings - Front 95mm NSK 70BNR, 2-P4 class-7 bearings
Spindle Bearings - Rear 95mm NSK 70BNR, 2-P4 class-7 bearings
Cutting Feedrate 0.04 - 394 ipm 10,000 mm/min
Axis Drive Motor Power – X, Y 2.7-HP (2.0kw nominal)
Axis Drive Motor Power - Z 4.0-HP (3.0kw nominal)
Ballscrews – X, Y, Z 32mm 12mm pitch
Least Input Command Increment 0.0001” / 0.000040” 0.001mm / (40-millionths in metric)
Tool Change Time 1.7-sec. tool-to-tool, Inverter Motor Driven
Maximum Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm
Maximum Tool Length (from gage line) 11.81” 300mm
Maximum Tool Weight 15 lbs. 7kg
Tool Selection / Tool Access Random access Bi-directional shortest path
Retention Knob (pull stud) C40-4502H (coolant), Japanese Standard
Air Service Requirements 85 psi @ 14-scfm 20 Kg/cm
Connected Load Electrical Requirements 50 Amps 220vac ±5%, 60-Hz
Coolant Capacity 68-gallons, 256 liters
Shipping dimensions (W x D x H) 97” x 91” x 101” 246x229x256cm

Dimensions: 87" x 81" x 113"
Weight: 11,245 LBS
Equipped With:
Mitsubishi Control
Chip Conveyor
5 Axis
8" Trunnion Included
Hector (Machine Shop in USA)