Specs:
X Axis Travel: 30"
Y Axis Travel: 20"
Z Axis Travel: 20"
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Max Table Load: 3,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Max Cutting 500 ipm
Max Thrust 3400 lbf
Max Tool Diameter 2.5"
Max Tool Diameter 5"
Max Tool Length 11"
Max Tool Weight 12 lb
Tool-to-Tool 2.8 s
Chip-to-Chip 3.6 s
Coolant Capacity 55 Gal
Table Size: 36" x 18"
Dimensions: 102" x 92" x 101"
Weight: 9,700 LBS
Y Axis Travel: 20"
Z Axis Travel: 20"
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Max Table Load: 3,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Max Cutting 500 ipm
Max Thrust 3400 lbf
Max Tool Diameter 2.5"
Max Tool Diameter 5"
Max Tool Length 11"
Max Tool Weight 12 lb
Tool-to-Tool 2.8 s
Chip-to-Chip 3.6 s
Coolant Capacity 55 Gal
Table Size: 36" x 18"
Dimensions: 102" x 92" x 101"
Weight: 9,700 LBS
Options:
Probe
Coolant Thru Spindle
Programmable Coolant
New Spindle Installed
Chip Auger
Programmable Macros
Rigid Tapping
1,000 PSI Through Spindle Coolant
Tool touch off
Kennametal Tooling Certificate Available!
Coolant Thru Spindle
Programmable Coolant
New Spindle Installed
Chip Auger
Programmable Macros
Rigid Tapping
1,000 PSI Through Spindle Coolant
Tool touch off
Kennametal Tooling Certificate Available!
Answers
any mechanical or electrical Issues?
Very Good
what city and state is this machine located in?
FL
what did it cost when it was new?
New Today ~$110,000
what is the maintenance and service history?
New 12,000 RPM Spindle & Motor in 2021
what accessories does it come with?
Probe, 1,000 PSI Coolant Pump, (Vise shown not included)
why are you thinking of selling it?
No longer Needed for current production
what are the cutting hours?
Spindle Time: ~6,000rs
can you send a video of the machine running?
https://youtu.be/Zijj3Cn-hdI
when can it come out?
Immediately Available
any options and upgrades?
1,000 PSI Coolant Pump, Programmable Coolant, Probe, Programmable macros, Rigid Tapping
any tooling included?
Kennametal Tooling Certificate Available!
what kind of material are you cutting?
Mostly Aluminum
Pre-owned HAAS VM2 2011 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a HAAS CNC Control control. This CNC Machine is currently located in USA. This HAAS Vertical Machining Center is available for a limited time. Get a quote today on this VM2 before it's gone.
Y Axis Travel: 20"
Z Axis Travel: 20"
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Max Table Load: 3,000 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Max Cutting 500 ipm
Max Thrust 3400 lbf
Max Tool Diameter 2.5"
Max Tool Diameter 5"
Max Tool Length 11"
Max Tool Weight 12 lb
Tool-to-Tool 2.8 s
Chip-to-Chip 3.6 s
Coolant Capacity 55 Gal
Table Size: 36" x 18"
Dimensions: 102" x 92" x 101"
Weight: 9,700 LBS
Coolant Thru Spindle
Programmable Coolant
New Spindle Installed
Chip Auger
Programmable Macros
Rigid Tapping
1,000 PSI Through Spindle Coolant
Tool touch off
Kennametal Tooling Certificate Available!