Used HP MJF 580 3D Printer

Pre-owned HP MJF 580 2021 3D Printer. This 3D Printer has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This HP 3D Printer is available for a limited time. Get a quote today on this MJF 580 before it's gone.

Specs:
Up to 332 x 190 x 248 mm (13.1 x 7.5 x 9.8 inches)
Building speed4 2,199 cm3 /hr (134 in3 /hr)
Full build job time for 248-mm (9.8-in) buildable height5 As fast as 18 hours
Partial build job time for 25-mm (1-in) buildable height5 As fast as 5 hours
Layer thickness 0.08 mm (0.003 inches)
Printhead resolution 1200 dpi
Dimensions (w x d x h) Printer 1565 x 955 x 1505 mm (61.6 x 37.6 x 59.3 inches)
Shipping 1770 x 1143 x 2013 mm (69.7 x 45 x 79.3 inches)
Operating area 2785 x 2530 x 2440 mm (109.6 x 99.3 x 96 inches)
Weight Printing 650 kg (1433 lb)
Shipping 850 kg (1874 lb)
Network6 Gigabit Ethernet (10/100/1000Base-T), supporting the following standards: TCP/IP, DHCP (iPv4 only), TLS/SSL)
Hard disk HDD 1TB (AES-256 encrypted, disk wipe DoD 5520M) & SSD 1TB (AES-256 encrypted)
Software Included software HP SmartStream 3D Build Manager HP SmartStream 3D Command Center Supported file formats 3MF, STL, OBJ, VRML v.2 Power Consumption 4.5-6.3 kW (typical) Requirements Two dedicated circuits configuration: input voltage 230 - 240 V (line-to-line), 16 A max, 50/60 Hz; One dedicated circuit configuration: input voltage 200 - 240 V (line-to-line), 36 A max, 50/60 Hz
Price:
$89,900
Payment:
Owner:
Bryant (Machine Shop in USA)
BUY NOW