Seller Needs:
$15,000|
13
|
0
Pre-owned KITAMURA MYCENTER H400 1999 Horizontal Machining Center. This Horizontal Machining Center has average cutting time and is equipped with a FANUC Series 16i-M control. This CNC Machine is currently located in Oregon. ...Read More
Seller Needs:
Payment:
Specs:
X Axis Travel: 28.93"
Y Axis Travel: 24.01"
Z Axis Travel: 24.01"
Spindle Speed: 13,000 RPM
Spindle Taper: 40 CT
Spindle Motor: 20 HP
Rapid Rate Y Axis: 2,362 IPM
Rapid Rate X Axis: 2,362 IPM
Rapid Rate Z Axis: 2,362 IPM
Tool Changer: 50 ATC
Max Pallet Load: 22 LBS
Pallet Size: 15.7" x 15.7"
Dimensions: 250" x 108" x 135"
Weight: 28,800 LBS
Electrics: 480 Volt, 3 Phase, 60 Hz (stepdown transformer utilized)
The machine is a 2nd-owner unit; current owner purchased approximately 8 years ago. Fanuc batteries were replaced with more easily managed outer access battery packs (see pics). Machine goes through yearly maintenance program including coolant and oil changes; way covers get pulled and all chips removed. Way covers replaced and resealed within last 5 years.
When machine was used in production, unit always went through 1-hour spindle warm-up routine prior to machining. Machine comes with (2) pallets and (2) tombstones.
Y Axis Travel: 24.01"
Z Axis Travel: 24.01"
Spindle Speed: 13,000 RPM
Spindle Taper: 40 CT
Spindle Motor: 20 HP
Rapid Rate Y Axis: 2,362 IPM
Rapid Rate X Axis: 2,362 IPM
Rapid Rate Z Axis: 2,362 IPM
Tool Changer: 50 ATC
Max Pallet Load: 22 LBS
Pallet Size: 15.7" x 15.7"
Dimensions: 250" x 108" x 135"
Weight: 28,800 LBS
Electrics: 480 Volt, 3 Phase, 60 Hz (stepdown transformer utilized)
The machine is a 2nd-owner unit; current owner purchased approximately 8 years ago. Fanuc batteries were replaced with more easily managed outer access battery packs (see pics). Machine goes through yearly maintenance program including coolant and oil changes; way covers get pulled and all chips removed. Way covers replaced and resealed within last 5 years.
When machine was used in production, unit always went through 1-hour spindle warm-up routine prior to machining. Machine comes with (2) pallets and (2) tombstones.
Options:
FANUC Series 16i-M
Chip Conveyor
Coolant Thru Spindle
360,000 Full 4th
50 Slot, Twin Arm Changer
Coolant Tank & Oil Skimmer
Spindle Chiller
Rigid Tapping
Way Lube & Spindle Bearing Air Oiler
Remote Pendant
Transformer
23 Tool Holders
Pull Studs
(2) Pallets, Tombstones
Manuals
Chip Conveyor
Coolant Thru Spindle
360,000 Full 4th
50 Slot, Twin Arm Changer
Coolant Tank & Oil Skimmer
Spindle Chiller
Rigid Tapping
Way Lube & Spindle Bearing Air Oiler
Remote Pendant
Transformer
23 Tool Holders
Pull Studs
(2) Pallets, Tombstones
Manuals
Seller:
JerrS494
Location:
OR
Further Reading
