Pre-owned 2015 OKUMA GENOS M560V 5-Axis Vertical Machining Center. This Five Axis VMC is Under Power and Can Be Inspected in Operation. This unit has below-average cutting time and is equipped with a OSP-P300M cont...Read More
Notify Me:
Rigging:
$2,950
Specs:
Table Size: 51.18" x 22.05"
Max Table Load: 1,980 LBS
X Axis Travel: 41.34"
Y Axis Travel: 22.05"
Z Axis Travel: 18.11"
Spindle Nose To Table: 5.91"- 24.02" (Min - Max)
Spindle Speed: 15,000 RPM
Spindle Motor: 30 HP
Spindle Taper: CAT40 Big Plus
Tool Changer: 32 ATC
Max. Tool Length: 11.8"
Max. Tool Diameter: 4.9"
Max. Tool Weight: 8"
EQUIPPED WITH:
OSP-300M CNC Control
Okuma / Lyndex 5AX-201 OSP 5-Axis Table
5-Axis Okuma I/F
Renishaw RMP60 Probe System
MistBlaster RF-8, 1,000 PSI Thru Spindle Coolant
MP-1200 Mist Collector
LNS Turbo HB Chip Conveyor
5-Axis Software Kit which Includes
Tool Center Point Control II / Super NURBS
Dynamic Fixture Offset (Fixture Tracking)
($29,380 Cost)
Under Power!!
Dimensions: 122" x 99" x 108"
Weight: 16,500 LBS
Max Table Load: 1,980 LBS
X Axis Travel: 41.34"
Y Axis Travel: 22.05"
Z Axis Travel: 18.11"
Spindle Nose To Table: 5.91"- 24.02" (Min - Max)
Spindle Speed: 15,000 RPM
Spindle Motor: 30 HP
Spindle Taper: CAT40 Big Plus
Tool Changer: 32 ATC
Max. Tool Length: 11.8"
Max. Tool Diameter: 4.9"
Max. Tool Weight: 8"
EQUIPPED WITH:
OSP-300M CNC Control
Okuma / Lyndex 5AX-201 OSP 5-Axis Table
5-Axis Okuma I/F
Renishaw RMP60 Probe System
MistBlaster RF-8, 1,000 PSI Thru Spindle Coolant
MP-1200 Mist Collector
LNS Turbo HB Chip Conveyor
5-Axis Software Kit which Includes
Tool Center Point Control II / Super NURBS
Dynamic Fixture Offset (Fixture Tracking)
($29,380 Cost)
Under Power!!
Dimensions: 122" x 99" x 108"
Weight: 16,500 LBS
Options:
OSP-P300M
Probe
Chip Conveyor
Coolant Thru Spindle
Programmable Coolant
4th Axis Rotary Table
5 Axis
Okuma / Lyndex 5AX-201 OSP 5-Axis Table
1,000 Thru Spindle Coolant MP Systems
Renishaw RMP60 Probe System
CAT40, 15,000 RPM, Big Plus Spindle
MP Systems MP-1200 Mist Collection System
5-Axis Software Kit which Includes Tool Center Point Control II / Super NURBS Dynamic Fixture Offset (Fixture Tracking) ($29,380 Cost)
ONLY 1,089 Cutting Hours!!!
Probe
Chip Conveyor
Coolant Thru Spindle
Programmable Coolant
4th Axis Rotary Table
5 Axis
Okuma / Lyndex 5AX-201 OSP 5-Axis Table
1,000 Thru Spindle Coolant MP Systems
Renishaw RMP60 Probe System
CAT40, 15,000 RPM, Big Plus Spindle
MP Systems MP-1200 Mist Collection System
5-Axis Software Kit which Includes Tool Center Point Control II / Super NURBS Dynamic Fixture Offset (Fixture Tracking) ($29,380 Cost)
ONLY 1,089 Cutting Hours!!!